The FlexBase25 is a stereo bass extension and management system with a separate LFE-channel input.
The crossover frequency is variable between 35-260 Hz, which allows changing the flavour of the system to match the task at hand. The ability to adjust the mono/stereo spread ensures that the system integrates even when higher crossover points are used. Unlike the conventional subwoofers, the system is designed to be easy to set-up and intuitive to use.
The LFE input has +10dB sensitivity compared to the main channels, but no built-in lowpass filtering. The LFE channel can be linked between several units which then allows building 7.1 and upward systems.
Operating principle: One-way Woofer: 2 x 25 cm / 10" aluminium Crossover frequency: 35-260Hz Crossover slopes: 24dB/octave THD+N @ 0dBu: -100dB System bandwidth: 6Hz - 200 kHz Input impedance: 25 kOhm Output impedance: 100 Ohm Measurement: (H x W x D) 840 x 342 x 321 mm Max HPF level: +20dBu Weight: 44 kg / 97 lb
FlexAmp500 Output Power: 2X300W RMS into 4 @ 1% THD Frequency response: 10Hz - 65kHz (-3dB) Distorsion: @ 1W 0,003% (100 Hz) Distorsion: @ 100W 0,006% (100 Hz) Signal to noise ratio: 93dB @ 1W Efficiency: 85% @ full power (230V operation