The Avalon AD2044 features 100% discrete, pure class A signal amplifier configured with high speed current monitored optical control elements.
These "invisible" opto elements enable the Avalon AD2044 to deliver totally transparent, low noise gain reduction within the minimalist signal path design. No VCAs are incorporated. Variable attack and release controls plus side chain access, provide unlimited creative control from soft compression to hard limiting.
The Avalon AD2044 Pure Class A opto-compressor is the most transparent, low noise optical-compressor available today. Designed to optimize absolute signal integrity and musical performance, the AD2044 combines advanced electronics with sonic excellence unequaled by lesser designs. The AD2044 is the perfect solution for two buss music-program compression, mono bass and instruments and mastering applications.
Features include state-of-the-art, balanced 100% discrete, Pure Class A signal amplifiers, practical "real-world" user features and rugged hardware designed to deliver true high performance audio for many years.
Linear Optical Compressor
Custom manufactured, high speed linear opto elements provide the non invasive passive attenuator system for invisible gain reduction. The AD2044 incorporates a unique external control loop and current monitored optical driver for smooth control plus the benefits of traditional vintage LDR compression.
Minimum Signal Path Design
Avalon's advanced true symmetry design offers high-voltage, large headroom, extended bandwidth and very low noise. The use of 100% discrete, Pure Class A signal amplifiers offer the serious music professional unlimited sonic character and a natural harmonic detail that enhances the program material and becomes one with the music itself.
The AD2044 can be found in the world's leading recording studio's, mastering facilities and artist/producers outboard racks. These professionals rely on the AD2044 daily to help them complete their "sonic signature" and turn recordings into musical masterpieces.
Smooth musical detail and sonic excellence
Minimum audio signal path
Pure Class A, 100% discrete design
Dual mono or Stereo operation
Transparent, non-invasive compression
Very low noise -94dB
High headroom +30dB
Fully balanced inputs and outputs
Long lasting, stainless steel hardware
External 150W toroidal power supply
100% discrete power supplies for audio path
All signal routing w/sealed silver relays
External side-chain access XLR
Low distortion less than 0.5% THD and IMD
Wide bandwidth -3dB 1Hz to 450kHz
Large accurate professional VU meters
Variable threshold, ratio, attack & release
DC coupled, no transformers in audio path
Fully balanced inputs and outputs
Circuit topology : High-voltage 100% discrete, balanced and symmetrical Class A
Output Gain Range : Variable -10dB to +10dB, center detent 0dB
Maximum Input Level : +30dB balanced XLR pin 2 hot
Maximum Output Level : +32dB balanced 600 ohms, DC coupled, high-current discrete Class A
Input / Output Type : XLR type, pin 2 hot balanced
Noise 20kHz Unweighted -94dB (compressor in)
Distortion THD, IMD : 0.5% (typical 0.05% at +6dB 1kHz)
Frequency Response -3dB : 1Hz to 450kHz (input band limited)
Gain Reduction Meter : Illuminated gain reduction meter 0dB to -20dB range
Output Meter : Professional moving coil type -20dB to +3dB (0VU=+4dB)
Compressor Type : Optical passive attenuator
Bypass : Hard-wire relay bypass for compressor in-out
Link Switch : Large illuminated push switch for stereo L-R linking
Make Up Gain : Variable 20dB range (-10dB to +10dB)
Threshold : Threshold variable -24dB to +20dB
Ratio : Ratio-compression variable 1:1 to 20:1
Attack : Variable 0.5mS to 150mS
Release : Variable 80mS to 5 seconds for 12dB release
Side-Chain XLR type, pin 2 hot balanced (switch/relay selectable from front panel)
AC-DC Power : External AC supply, 150w toroidal transformer, 4 pin cable 90v isolated,
(B2T Power Supply Included) : 100-240v selectable 50/60Hz, 150w max