From the world leader in digital signal processing comes the new 376 Tube Channel Processor with digital output capabilities.
dbx Professional Products has been paving the way for audio excellence for more than 25 years, and with the creation of the 376, the drive continues. The 376 has taken the essential tools needed for channel strip processors and has greatly added to the feature list, making it an all inclusive toolbox that offers all of the effects required. With an effect menu list that includes such standard features as: a tube preamp section, 3-Band parametric EQ section, Compressor, De-Esser and digital outputs, the 376 is the perfect companion piece for recording and tracking vocals and mic'd applications in the analog and digital domain.
The 376 Tube Channel Strip w/Digital Output is the latest addition to the Silver Series family. The 376 puts the best of both worlds into one affordable package by combining the warmth of the vacuum tube, with the proprietary dbx Type IV conversion system. The 376 boasts many of the same features as other products in the Silver Series, such as +48V phantom power, a phase invert switch, and low cut filtering. In addition, the 376 also offers digital output capabilities in both AES/EBU, and S/PDIF formats as standard features. The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch, and 20 dB pad show our dedication to providing convenience in the studio. The LED meters provide a clear and concise visual of the signal processing at a glance. The rear panel includes both mic and line inputs and outputs, word clock sync input and output, insertion jack and digital outputs. Add selectable sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive list of features, and we think you'll agree that the 376 lives up to the uncompromising standards of dbx Professional Products.
Tube microphone pre-amp200V tube plate voltageSelectable mic/line switch+48 Volt phantom power3-Band Parametric EQCompressorDe-EsserFront panel instrument inputDrive meter LEDsThreshold and De-Esser meters8 segment analog or digital meterType IV conversion systemSelectable sampling rate (96, 88.2, 48, 44.1kHz)24, 20 and 16 bit wordlengthsAES/EBU and S/PDIF digital outputsSelectable dither and noise-shaping algorithmsWord clock sync input and output
Mic Preamp Connector : Female XLR Pin 2 Hot; Electronically balanced/unbalancedMic Preamp Input Impedance : 330Mic Preamp max input level : -9 dBu or +11 dBu with 20 dB pad engagedCMRR : >40dB, Typically 55dBMic Preamp Equivalent Input Noise (EIN) : Typically -120 dBu with a 150 source load, 20Hz to 20kHz BWInput Connectors : (instrument/line) 1/4" JackInput Type : (line) Electronically balanced/unbalanced; (instrument) UnbalancedMax Input : (instrument/line) +21dBu balanced or unbalancedGain Adjustment Range : (drive control) Line/Instrument: -15dB to +15dB; Mic: +30dB to +60dBOutput Connectors : Male XLR Pin 2 Hot and TRS 1/4"Output Type : Servo-balanced/unbalancedOutput Impedance : Balanced 120, unbalanced 60Max Output : >+21 dBu, >+20 dBm (into a 600 load)Insert Connector : TRS 1/4" UnbalancedInsert Impedance : 100 (SEND), 20k (RETURN)Digital Output Connector : XLR for AES/EBU, RCA for S/PDIFDigital Output Impedance : 110 for AES/EBU, 75 for S/PDIFWord Sync I/O Connectors : BNCWord Sync Input Impedance : 75 terminated by internal jumperWord Sync Input : 96, 88.2, 48, or 44.1kHz word clockWord Sync Output : 96, 88.2, 48, or 44.1kHz word clockOutput Level : -20dB to +20dBLine Switch : Selects between microphone and line inputsMic Preamp Phantom Power : +48VPad Switch : 20dB padPhase Invert Switch : Reverses pins 2 and 3 of the microphone input XLRLow cut Switch : 75Hz, 12dB/octave high pass filterFrequency Response : (analog) <10Hz to 75kHzTHD+Noise : 0.35% typical at +4dBu out, 1kHz, 40 dB gainEQ Low Frequency : 80 Hz, shelving filterEQ High Frequency : 12 kHz, shelving filterEQ Mid Frequency : Sweepable from 100 Hz to 8 kHz, bandwidth 1.5 octavesEQ Gain : (all bands) Sweepable from -15 to +15 dBCompressor Threshold Range : -40 dBu to +20 dBuCompressor Threshold Characteristic : Selectable OverEasy or Hard KneeCompressor Ratio : Variable; 1:1 to Infinity:1; 60 dB maximum CompressionCompressor Attack Time : Program-dependent; Typically 5 ms (SLOW disabled), 15 ms (SLOW enabled) for 15 dB Gain ReductionCompressor Release Time : Program-dependent; Typically 50 dB/sec (SLOW disabled), 8 dB/sec (SLOW enabled)De-esser Characteristic : Wideband gain reductionDe-esser Frequency Range : 800 Hz to 10 kHz High PassDe-esser Release Time : 12 dB/octave program-dependent; approximately 1 ms/dBA/D Converter : dbx Type IV A/D Conversion SystemSample Rate : 96, 88.2, 48, or 44.1kHz selectableWordlength : 24, 20, or 16 bit selectableDither Type : TPDF, SNR2, or noneNoise Shape : Shape 1, Shape 2, or noneDigital Output : S/PDIF or AES/EBUDigital Output Dynamic Range : 107dB typical, A-weighted, 22kHz bandwidthOperating Voltage : DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60HzPower Consumption : 35W