Designed from the ground up to provide state-of-the-art signal processing, the DBX DriveRack 220i is the perfect tool for any fixed-install application.
With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.
The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.
Input : (2) Switchable line or mic inputsInput Connectors : Female XLR line inputs and EuroblockInput Type : Electronically balanced/RF filteredInput Impedance : >50k ohmMax Input : +20dBuCMRR : > 40dB, typically >55db @ 1kHzMic Preamp gain : 30 to 60dBMic Preamp Equivalent Input Noise (EIN) : < -110dB, 22Hz-22kHz, 150 ohmMic Preamp Phantom Power : +15VDCOutput : 2 totalOutput Connectors : Male XLR and EuroblockOutput Type : Electronically balanced, RF filteredOutput Impedance : 120ohm balanced, 60ohm unbalancedMax Output : +20dBuA/D Converter : dbx Type IV? Conversion SystemA/D Dynamic Range : (line) >113 dB, A-weighted, >110 dB unweightedType IV Dynamic Range : >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BWSample Rate : 48kHzD/A Dynamic Range : 112 dB A-weighted, 109dB unweightedDynamic Range : >110 dB A-weighted, >107dB unweightedTHD+Noise : 0.003% typical at +4dBu, 1kHz, 0dB gainFrequency Response : 20Hz - 20kHz, +/- 0.5dBInterchannel Crosstalk : >110dB, 120dB typical, (input-to-output: >780dB)Operating Voltage : 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60HzDimensions : 19" Wide, 1.75"High, 7.7" DeepSafety Agency Certifications : UL 6500, IEC 60065, EN 55013, E 60065