The DirectOut Technologies ANDIAMO 2.XT BNC/SC provides two MADI inputs and outputs, 16 AES inputs and outputs and 32 channels analog inputs and out-puts.
ANDIAMO 2.XT is an AES/MADI AD/DA converter with superior sound quality. Based on the unique ANDIAMO 2 a higher level of integration and flexibility is achieved by adding digital AES inputs and outputs (AES3).
The front panel provides status LEDs for all channels for a quick check of signal status (signal present, over, sync state) of all input and output channels.
A routing matrix enables audio conversion from any input port to any output port (e.g. analog MADI and MADI AES) at the same time.
Two units may be cascaded, extending the number of channels for conversion up to 128. Via Bank Selection the desired part of the MADI stream (ch 01-32 or ch 33-64) can be selected.
Individual Routing & Remote Operation
A Matrix Mode offers free signal routing on a per channel basis. The routing matrix is accessed via the ANDIAMO remote software. There are different methods available for remote connection:
- Serial control via USB
- Serial over MADI (embedded RS-232 data)
- MIDI over MADI (embedded MIDI data)
ANDIAMO 2.XT can be clocked by word clock, MADI input, AES input or internally. The system clock is provided at the word clock output at any time.
ANDIAMO 2.XT offers highest reliability through two phase redundant power supplies with inlets and switches on the rear panel.
ANDIAMO 2.XT is equiped with two MADI ports and provides port redundancy and increased flexibility.
The sensitivity of the converter may be switched between two levels (hi / lo) - discrete for A/D and D/A. Select one of three different versions when ordering ("configure to order"):
- Version "A": +06 dBu / +15 dBu
- Version "B": +09 dBu / +18 dBu
- Version "C": +15 dBu / +24 dBu
ANDIAMO 2.XT (SRC) can be used for conversion, monitoring, recording and routing of analog and digital signals.
Typical applications include :
monitoring digital audiorecording line signalsredundant recording using both MADI I/Ossignal routing / distribution (128 x 128 cross points)conversion from / to AES to / from MADIintegration of asynchronous AES signals [SRC Version]mixed conversion of AES and analog signals to MADIformat conversion of MADI signals
Technical Data :
MADI Ports (I/O) : 2 x SC-Socket multi-mode or 1 x SC-Socket multi-mode & 1 x coaxial BNC, 75
Digital (I/O) : 4 x DSUB-25 (AES3)
SRC Version : sample rate converters on all AES inputs (switchable)
Analog (I/O) : 8 x DSUB-25, balanced (TASCAM pinout)
Analog level (I/O) : +6 dBu / +15 dBu (digitally switchable) or +9 dBu / +18 dBu (digitally switchable) or
+15 dBu / +24 dBu (digitally switchable)
SNR : -115,5 dB RMS (20 Hz - 20 kHz) / -118 dB(A)
THD @ -1dBFS : -113 dB
Frequency response : -0,15 dB (10 Hz) / -0,15 dB (20 kHz)
SNR: -113,5 dB RMS (20 Hz - 20 kHz) / -116,5 dB(A)
THD @ -1dBFS: -100 dB
Frequency response: -0,5 dB (10 Hz) / -0,15 dB (20 kHz)
Word clock : coaxial BNC (75 termination switchable)
USB : USB 2.0 for firmware updates and remote control
Sample rates : 44.1, 48, 88.2, 96 kHz (+/- 12,5%)
MADI formats : 48k / 96k Frame, 56 / 64 channel, S/MUX
Power supply : 2 x 84 V to 264 V AC / 47 Hz to 63 Hz / safety class 1, phaseredundant
Dimensions : Width 19'' (483 mm), Height 2 HU (89 mm), Depth 10'' (254 mm)
Weight : about 4 kg