An omnidirectional high-voltage (130 V) condenser microphone with extremely linear frequency response and extended low frequency handling capability (-2 dB at 10 Hz). Its high sensitivity and low noise-floor makes the microphone the perfect choice for all professional recordings.

The hi-voltage system enables the mic to handle approximately 10 dB higher SPL than the d:dicate? 4006 Omnidirectional Microphone. The impressive dynamic range of the mic, together with the wide range of acoustic pressure equalizers and protection grids puts the top-tier of studio quality microphones.

Detailed and natural reproduction

High sensitivity and low noise-floor

Excellent for concert halls and spot miking acoustical instruments

Directional characteristics: Omnidirectional

Principle of operation: Pressure

Cartridge type: 16 mm (0.63 in) pre-polarized condenser

Frequency range, ± 2 dB: 10 Hz - 20 kHz

Sensitivity, nominal, ±2 dB: 40 mV/Pa; -27 dB re. 1 V/Pa unloaded (at 250 Hz)

Equivalent noise level A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equiv. noise level ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)

S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 79 dB

Total harmonic distortion (THD): <0.5% up to 129 dB SPL peak, <1% up to 135 dB SPL peak

Dynamic range: Typ. 120 dB

Max. SPL, peak before clipping: 154 dB SPL peak (f<4 kHz)

Output impedance: <75 ohm

Cable drive capability: With HMA5000: Up to 300 m (984 ft)

Power supply: 130 V via HMA5000

Connector: 4-pin modified XLR-M (High Voltage)

Weight: 150 g (5.29 oz)

Capsule diameter: 16 mm (0.63 in)

Microphone length: 165 mm (6.5 in)

Operating temperature range: -40 to +55°C (-40 to 131°F)