Originally designed for use with wireless systems in theater, television and close-miked instrument applications, the d:screet? 4062 Miniature Omnidirectional Microphone, XLo-Sens is highly unobtrusive. Because of its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup.
The mic is acoustically identical to the d:screet? 4060 Miniature Omnidirectional Microphone, Hi-Sens, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market.

The d:screet? 4062 Miniature Omnidirectional Microphone, XLo-Sens is available in two colors: black and beige.

Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine?, d:screet? and d:vote? series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Includes a choice of adapter for:

3-pin Lemo - Sennheiser SK50 / 250 / 3063 / 5012

Locking Mini-Jack - Sennheiser Evolution / G2 / X2 Digital

TA4F Mini-XLR - Shure U1 / UR1 / UT1 / SC1 / SLX1 / ULX1

TA5F Mini-XLR - Lectrosonics LM / SM / UM Series (low DC micrphones)

Extremely rugged and reliable

Exceptional audio quality

Low noise and high sensitivity

Large selection of accessories

Modular adapter system fits most professional wireless systems

Directional characteristics: Omnidirectional

Principle of operation: Pressure

Cartridge type: Pre-polarized condenser element with vertical diaphragm

Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz.

Sensitivity, nominal, ±3 dB at 1 kHz: 1 mV/Pa; -60 dB re. 1 V/Pa

Equivalent noise level A-weighted: Typ. 33 dB(A) re. 20 µPa (max. 37 dB(A))

Equiv. noise level ITU-R BS.468-4: Typ. 45 dB (max. 49 dB)

S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 61 dB(A)

Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine

Dynamic range: Typ. 90 dB

Max. SPL, peak before clipping: 154 dB

Output impedance: 30 - 40 ohm

Cable drive capability: Up to 300 m (984 ft)

Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.

Connector: MicroDot

Color: Black, beige

Microphone weight: 7.5 g (0.26 oz) incl. cable and MicroDot connector

Microphone diameter: 5.4 mm (0.21 in)

Microphone length: Max. 12.7 mm (0.5 in)

Cable length: 1.8 m (5.9 ft)

Cable diameter: 1.6 mm (0.06 in)

Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin

Operating temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH): Up to 90%