With eminent sound quality, a large range of accessories and adapters available for all pro wireless systems, this miniature condenser mic is the obvious choice for any application requiring a big sound and a small footprint.

The d:screet? 4071 Omnidirectional Microphone, Low-cut, Presence Boost is an outstanding speech and vocal mic. It makes voice heard and intelligible. It is also resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the mic capsule so the built-in preamplifier (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.

Another equally important consideration is that when placing a microphone on the body, especially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The d:screet? 4071 Omnidirectional Microphone, Low-cut, Presence Boost has a built-in boost to compensate for this loss. Especially for ENG work, this mic is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.

Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine?, d:screet? and d:vote? series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Extremely rugged and reliable

Exceptional audio quality

Low noise and high sensitivity

Large selection of accessories

Modular adapter system fits most professional wireless systems

Directional characteristics: Omnidirectional

Principle of operation: Pressure

Cartridge type: Pre-polarized condenser element with vertical diaphragm

Frequency range, ± 2 dB: 100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz

Sensitivity, nominal, ±3 dB: 6 mV/Pa ved 1 kHz; -44.4 dB re. 1 V/Pa

Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))

Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB (A)

Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine

Dynamic range: Typ. 97 dB

Max. SPL, peak before clipping: 144 dB

Output impedance: 30 - 40 ohm

Cable drive capability: Up to 300 m (984 ft)

Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.

Connector: MicroDot

Color: Black, beige or white

Microphone weight: 9 g (0.32 oz) incl. cable and MicroDot connector

Microphone diameter: 5.4 mm (0.2 in)

Microphone length: 17 mm (0.67 in)

Cable length: 1.8 m (5.9 ft)

Cable diameter: 1.6 mm (0.06 in)

Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin

Operating temperature range: -10 to 45°C (14 to 113°F)