BM12 mkIII has been designed around highly efficient hand-crafted neodymium drivers, providing faithful transient response and an SPL of 123 dB for larger listening environments.
The BM12 mkIII expands on the legacy of the classic BM12A design. Double neodymium magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate Polymer providing unrivaled accuracy.
8" Nearfield MonitorHandcrafted drivers with aluminum voice coilsClass AB amplificationBundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper anglingMade in Denmark
100W LF and 50W HF Class AB amplifierExtended excursion 8" woofer with pure aluminum voice coil1.1" soft dome tweeter with pure aluminum voice coil123dB max. SPLFrequency response of 38Hz-21kHzHF, MF, LF analog room filters allow flexible positioningHigh pass filters at 60/80Hz for perfect subwoofer adaptionInput sensitivity switch (-10/+4dB range)
System:
Two-way Active Nearfield Monitor
Frequency Response (+/- 3 dB):
38Hz - 21kHz
Input level for 85 dB SPL @1m:
123 dB
Power consumption:
Idle: 15 W / Max: 130 W
Amplifier power:
Tweeter: 50 W / Woofer: 100 W
Resonance Frequency:
40 Hz
Principle:
Bass reflex
Crossover Frequencies:
1500 Hz
Crossover Slope:
6 dB/oct
Tweeter:
Esotec 28 mm/1.1" soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coil
Woofer:
200 mm/8", One-piece molded poly-prop cone, 75 mm/3" kapton voice coil, Neodymium magnet
Weight:
12,5 kg / 27.5 lbs
Dimensions (W x H x D):
234 x 369 x 328 mm / 9.2" x 14.6" x 12.9"