The BM12 mkIII expands on the legacy of the classic BM12A design. Double neodymium magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate Polymer providing unrivaled accuracy.

8" Nearfield Monitor

Handcrafted drivers with aluminum voice coils

Class AB amplification

Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling

Made in Denmark

100W LF and 50W HF Class AB amplifier

Extended excursion 8" woofer with pure aluminum voice coil

1.1" soft dome tweeter with pure aluminum voice coil

123dB max. SPL

Frequency response of 38Hz-21kHz

HF, MF, LF analog room filters allow flexible positioning

High pass filters at 60/80Hz for perfect subwoofer adaption

Input sensitivity switch (-10/+4dB range)

System:
Two-way Active Nearfield Monitor

Frequency Response (+/- 3 dB):
38Hz - 21kHz

Input level for 85 dB SPL @1m:
123 dB

Power consumption:
Idle: 15 W / Max: 130 W

Amplifier power:
Tweeter: 50 W / Woofer: 100 W

Resonance Frequency:
40 Hz

Principle:
Bass reflex

Crossover Frequencies:
1500 Hz

Crossover Slope:
6 dB/oct

Tweeter:
Esotec 28 mm/1.1" soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coil

Woofer:
200 mm/8", One-piece molded poly-prop cone, 75 mm/3" kapton voice coil, Neodymium magnet

Weight:
12,5 kg / 27.5 lbs

Dimensions (W x H x D):
234 x 369 x 328 mm / 9.2" x 14.6" x 12.9"