The BM mkII Subwoofer Series
The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance.

Dynaudio mkII-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

12" Subwoofer

Handcrafted driver

Selectable LFE or slave mode

Made in Denmark

12" woofer with pure aluminum voice coil. 300W @ 4 ohm

Phase adjustment in 0° / 180°; Auto on/off, power LED

Discrete LFE input, slave output for linking

Seamless adjustment of low-pass corner frequencies

SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz

Closed cabinet for extremely precise low frequency reproduction

System: Precision Subwoofer

Frequency Response: 18 Hz to 250 Hz (+/-3 dB)

Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth

XLR Input impedance: + branch 20 kOhm, - branch 10 kOhm

Sensitivity: 75 mVRMS to 5 VRMS, adjustable

Max. Input voltage: 10 VRMS

Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered

XLR Output impedance: 100 Ohm (each branch)

XLR Pin-out: 1: 0 / 2: + / 3: -

Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode

Phase adjustment: 0° - 180°

SAT High-pass: Flat, 60 Hz, 80 Hz

SUB Low-pass: 50 Hz to 150 Hz

Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.

Amplifier power: 300 W, 4 Ohm

Power consumption: <16 W Standby, 325 W Max.

Woofer: 300 mm/12", One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4", Pure aluminum voice coil

Weight: 21 kg. / 46.3 lbs

Dimensions (WxHxL): 350 x 350 x 369.5 / 13.8" x 13.8" x 14.5"