Shopping cart | Login |
Languages
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.
HomepageMonitoringActive Monitors › Dynaudio BM 5 MKIII
Dynaudio BM 5 MKIII

The BM5 mkIII is the next generation of the tremendously successful BM5A MKII.

With greater SPL, broader frequency and power response compared to the previous model, its ultra-high dynamic range and hand-crafted drivers deliver performance superior to many larger, more expensive monitors.

Double neodymium magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate Polymer providing unrivaled accuracy.
  • 7" Nearfield Monitor
  • Handcrafted drivers with aluminum voice coils
  • Class-D Amplification with DSP
  • Flexible operation with XLR and RCA inputs
  • Bundled with IsoAcoustics ISO-L8R155 speaker stand for decoupling and proper angling
  • Made in Denmark
  • Features
  • 50W LF and 50W HF RMS Class D amplifier with DSP crossover
  • Extended excursion 7" woofer with pure aluminum voice coil
  • 1.1" soft dome tweeter with pure aluminum voice coil
  • 118dB max. SPL
  • Frequency response of 42Hz-24kHz
  • HF, MF, LF room filters allow flexible positioning
  • High pass filters at 60/80Hz for perfect subwoofer adaption
  • Input sensitivity switch (-10/+4dB range)
  • Specifications
    System:
    Two-way Active Precision Nearfield Monitor

    Frequency Response (+/- 3 dB):
    42 Hz - 24 kHz

    Input level for 85 dB SPL @ 1m:
    100 mVrms

    Max SPL 1m, normal room:
    118 dB peak

    Power consumption:
    Standby: 0.3 W Idle: 5.8 Max: 94 W

    Amplifier power:
    Tweeter: 50 W Woofer: 50 W

    Resonance Frequency:
    45 Hz

    Principle:
    Bass reflex

    Crossover Frequencies:
    1900 Hz

    Crossover Slope:
    12 dB/oct

    Tweeter:
    D-281 - 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil

    Woofer:
    180mm molded aluminum frame/ one piece thermo formed MSP cone 75 mm voice coil with pure aluminum wire on aluminum former

    Weight:
    7,7 kg / 16.9 lbs

    Dimensions (W x H x D):
    186 x 320 x 296 mm / 7.3" x 12.5" x 11.6"

    Crossover Slope:
    12 dB/oct

    Tweeter:
    D-281 - 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil

    Woofer:
    180mm molded aluminum frame/ one piece thermo formed MSP cone 75 mm voice coil with pure aluminum wire on aluminum former.

    Weight:
    7,7 kg / 16.9 lbs

    Dimensions:
    (W x H x D) 186 x 320 x 280 mm / 7.3" x 12.5" x 11"
    Reviews
    4.5
    Kevin Austin
    Montreal, QC
    July 1, 2015
    Very Fine $1500 loudspeakers
    I like Dynaudio and these speakers replace my old BM5s. Good precision, minimal coloration. An excellent choice in the under $2500 category, especially when size is a consideration. I have them one meter from my ears, and have added two subs to produce 'full-range' speakers. This is not to say that they are weak in the bottom, but they do follow the frequency response curve published, and they are the smallest in the new Dynaudio line. The high frequency response is clear and appears quite linear. My ears reveal high precision in the phase response, so imaging is also very precise. My one reservation is that there is no 'direct out', so I have had to split the input signal from my sound card, which means I don't fed them a balanced input. I view this as a design flaw. Studio Economic has the very best prices I found. Service is excellent.
    Price *
    $929.00
    $829.00
    Special
    $749.00
    Free shipping in Canada. Conditions
    Additional information
    For more information about the BM 5 MKIII, please visit the website of Dynaudio
    Dynaudio Logo
    ©2004-2016 - Systemes Guinois® Inc. All Right Reserved.