The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor.
Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.
With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.
Unique linear phase frequency response Frequency Response: 20Hz - 25kHz Dual 12" ESOTAR² Woofers, aluminum voice coil Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil Max. SPL (short term peak @ 1m): 133 SPL Heavy internal damping for minimum cabinet resonance
System:3-way Active Main Monitor Frequency Response (+/- 3 dB): 22 Hz - 21 kHz Peak SPL 1m, pair (IEC Short Term): > 133 dB peak Amplifier minimum: 2 x Lab.gruppen PLM10000Q Resonance Frequency: 24 Hz Internal Cabinet Volume: 145 liters Bass Principle: Bass reflex Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05 Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material Midranges: 15 cm with 75 mm diameter pure aluminum wire voice coil, one-piece molded MSP cone Woofer: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke Weight: 65 kg Dimensions (WxHxL): 555 x 775 x 505 mm Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer. Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.
Number of amplifier channels: 4 Max out Power per Channel (4 ohms, all channels driven): 3000 W THD + N at 1 kHz and 1 dB below clipping: < 0.04 % Dynamic Range: > 114 dB Channel separation (Crosstalk) at 1 kHz: > 70 dB Inputs: Analog, AES/EBU & Dante Analog Input Sample Rate / Resolution: 96 kHz / 24 bit Weight: 16.5 kg (36 lbs) Dimensions (WxHxD): 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")
Write a review about the Dynaudio M3VE - package
* Required fields
1 (Not for me)
will not be published
E.G.: Montreal, QC