Désolé, le produit Focusrite OctoPre mkII Dynamic n'est malheureusement plus disponible sur le site de Studio Economik.

Intéressé(e) par d'autres produits de la catégorie Préamplificateurs?

Voulez-vous voir les autres produits disponibles pour Focusrite?
Voici quelques suggestions qui pourraient vous intéresser;

Information

OctoPre MkII Dynamic is Focusrite's feature-rich expansion upgrade for any digital audio workstation.

With eight channels of Focusrite microphone pre-amplification, eight VCA-based Red 3-derived compressors and built-in 24-bit / 96 kHz digital inputs and outputs, OctoPre MkII Dynamic is Focusrite's feature-rich expansion upgrade for any digital audio workstation. It's equally an ideal expansion for any analogue or digital console, or hard disk recorder.

Digital inputs and outputs let you make the most of often-neglected ADAT i/o; ideal for expanding the number of mic-pre inputs on your interface or for providing analogue monitoring from any digital ADAT feed.

With this entire package fitting into a single 1U chassis complementing Focusrite's Saffire PRO range, and all controls adjustable from the front fascia, OctoPre MkII Dynamic sets the standard for modern, compact, multi-channel recording expansions.

Caractéristiques

Eight award-winning Focusrite pre-amps
Focusrite's unparalleled pre-amp legacy forms the foundation of this new device, with pre-amps optimized to handle extreme levels from sound sources like acoustic drums.

Eight 'single-dial' Focusrite Compressors
A single dial gets you to the right amount of compression, fast. These new VCA-based, feed-forward compressors model the character of the celebrated Focusrite Red 3.

Compress transparently or with effect
The classic soft-knee design achieves beautifully transparent compression that caresses your sound. Focusrite's unique "More" switch doubles the ratio to deliver 'compression with effect'.

Built-in eight channel 24-bit / 96 kHz digital outputs
Make the most of your interface's ADAT input for tracking, with eight channels of analogue to digital conversion via ADAT, boasting a 'real world' dynamic range performance of 110dB.

Built-in eight channel 24-bit / 96 kHz digital inputs
Switchable from the front panel, digital to analogue conversion via ADAT provides analogue monitoring of any digital ADAT feed, as well as the ability to clock from any ADAT device.

State-of-the-art Clocking Solutions
OctoPre MkII Dynamic's internal clock delivers a jitter performance of +/- 20 PPM. For external clocks, industry-standard JetPLL jitter elimination technology is employed

Two high-quality instrument inputs
OctoPre MkII Dynamic's first two channels feature DI's, ready for you to plug in your Guitars and Bass. No expensive external DI required.

Spécifications

Mic Input
Frequency Response: 20Hz - 20kHz +/- 0.1 dB
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
Mic Gain: +10dB to + 55dB
Phantom power switched in 4 channel groups on Mic. 1-4 and 5-8
Maximum input level +16dBu

Line Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB
THD+N: <0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
Noise: -90dBu (22Hz/22kHz bandpass filter)
Line 1-8 Gain: -10dB to +36dB
Maximum input level +26dBu

Instrument Input
Frequency Response: 20Hz - 20kHz +/- 0.1dB
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
Noise: -87dBu (20Hz/22kHz bandpass filter)
Instrument Gain: +10dB to +55dB
Maximum input level +16dBu

Analogue Output
Frequency Response: 20Hz - 20kHz +/- 0.2dB.
THD+N <0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Nominal output level 0dBFS = 16dBu, balanced

Compression
Threshold Range: -44dBFS (Max setting) to -4dBFS (Min setting)
Compression Ratio Normal: 2:1, More: 4:1
Auto Make Up Gain: 4dB (Min setting), 18dB (Max setting)
Attack Time: 1.2ms, Release Time: 28ms (-3.5dB method)
Compression Curve: Classic Focusrite Soft Knee
THD+N (maximum at any compression threshold, input < +16dBu, gain at minimum): < 0.18%

Digital
A/D Dynamic Range 110dB 'A-weighted' (all inputs)
D/A Dynamic Range 110dB 'A-weighted' (all outputs)
Clock Jitter < 250 pico seconds
Sample rates: 44.1kHz to 96kHz
Sample Rate Clock Accuracy: +/- 20PPM
JetPLL technology providing superb jitter reduction for class leading converter performance
Clock sources: Internal, Word Clock and ADAT (from ADAT1 input only)

Weight
Single unit unboxed net weight : 3.6 kg / 7.3 lbs
Single unit boxed net weight : 4.05 kg / 8.9 lbs

Dimensions
Unboxed: W = 484mm / 19", H = 45mm / 1.8", D = 265mm / 10.4"
Boxed: W= 595 mm / 23.5", H= 120 mm / 4.75", D= 340 mm / 13.4"
Maintenant offert
Financement disponible
Aimez-nous
Suivez-nous
©2004-2024 - Studio Economik Inc.® Tous droits réservés.