Sorry, the product Groove Tubes Ditto is not available anymore on Studio Economik's website.

Interested in other Cables & Accessories products?
We have a few suggestions you could be interested in;

Information

This is the ultimate DI box and instrument preamp for both stage and studio. Allows for isolated balanced low impedance output for all instruments. Provides either unity gain or use the variable output level control for up to 30dB of all tube gain! perfect tube tone and isolaton for vintage keybords, electric bass and acoustic/electric guitars with iternal transducer type pickups. Uses Neutrik connectors, a custom Nickel core output transformer, one 12AU7 plus one 12AX7 Groove Tubes.

The DITTO is the "Swiss Army Knife" for recording AND live performance. A few of the uses are as follows:

1. Direct to console - Use the DITTO for an acoustic/electrified guitar - input directly to a recording console for warmth and proper matching.

2. Live to sound reinforcement console - In a live performance, long unbalanced cable runs can compromise your tone. When using with keyboards or rack systems, you can now set your equipment levels to the settings for best signal to noise ratio. Let the DITTO bring up or down the overall signal for those long cable runs with an improvement in sound.

3. A must for guitar players with pedal boards - You have a large investment in a pedal board. These are versitile devices, out on stage with the player. Unfortunately, the long cable run (over 25' in many cases) back to your amp, does little for sound quality. Let the DITTO handle the task of proper balancing and drive of the signal with ease. Once again, set the effects for the proper level for the best sound, rather than using the last effect in the chain to handle this task with it's own internal little op-amp that is not the best designed component for this task.

4. POD 2.0 and POD xt users - whether direct recording or in live performances, placing the DITTO between the POD and the amp, recorder, console, or house system will give a warmth to your signal and tube feel, sound, and playing dynamics. One more time, proper level can now be set on the POD output control so signal to noise ratio is optimized. In the high gain POD models, this can really help the background noise to the amp, console, or recorder for a cleaner and quiter signal.

5. Make your guitar, bass, keyboard, or less expensive dynamic microphone sound better - the transformer balanced tube circuitry are the keys for proper matching to your instrument.

Some other DITTO tricks ....

The DITTO makes a great preamp for use with many amps which have effects loops. In an amp such as a Marshall or Mesa, which have their own signature tone which comes from their preamp design, one can run their guitar into the DITTO, and take the XLR DITTO output with an XLR to 1/4" cable. Run the 1/4" end of the cable to the amps effects return. You have now bypassed the amplifiers preamp and your amp will now allow the output section to be very clean. This is great for clean sounds, and some folks love this for acoustic guitar work. This effectively doubles the use of many amps. The latest Fender Pro Tube series amps (Pro Twin, Pro Concert, and Pro Reverb) have a pre out / main in set of jacks. Use the main in, as it is specifically designed for this sort of use.

You may also use the DITTO in live applications with the guitar plugged into the DITTO's 1/4" input, and then run a cable from the second 1/4" input to your amp. There will be no processing on your signal to the amp. Then take the XLR output to the house system. This allows a mix of your amps output and also allows you to control what level goes to the house system from the stage.

The DITTO uses engineering thinking of it's big brother the Vipre. The Vipre is now used in many major studios, as has many awards, nominations, and testimonials to it's own credit.
Now accepting
Financing available
Like us
Follow us
©2004-2024 - Studio Economik Inc.® All Right Reserved.