Sorry, the product Harrison Audio 950mx is not available anymore on Studio Economik's website.

Interested in other Mixing Boards products?
We have a few suggestions you could be interested in;

Information

The Harrison 950mx Console sports a history-rich analog design incorporating many of the same high-end modular design elements found across a wide range of Harrison console models from eras past such as the 32 Series, MR Series (2, 3, 4, 5 and 7), SeriesTen, SeriesTwelve, MPC and LPC. The 950mx provides a superior analog mixing platform that will cost effectively complement today's high performance music studio where investments in powerful DAW's and high-end specialized outboard gear are the norm.

The 950mx was designed by Harrison's most experienced analog designers, and they were challenged to make the best-sounding, highest-spec analog console available today.
  • Manual PCB layout
  • Robust ground plane design
  • Linear power distribution
  • Gold Euro-card module connectors
  • Gold plated switches
  • Conductive plastic potentiometers
  • 100% through-hole design
  • All I/O is balanced
  • Summing buses carried via PCB's (no ribbon cable summing buses)
  • Features

    These features combine to provide the highest possible performance in analog mixing console design.

    The Harrison 950mx frame design is rugged and unique. Designed with input from studio engineers, it is specifically designed to minimize some common ergonomic issues found in today's studio using DAW and outboard based setups: "Where do I put a keyboard, mouse or trackball and where do I put the computer monitor/s" The 950m solves those issues by providing a 2-tiered front bolster which is wide and deep enough to comfortably locate a DAW keyboard and mouse or trackball (with sufficient cable access). A generous flat top is ideal for locating DAW monitor/s and/or small speakers. The 950mx module area is supported at a 15 degree pitch providing comfortable viewing access and control immediately above your keyboard, mouse, and DAW control surface(s).

    Input Channels

    Mono Mic / Line Inputs (purchased in groups of 4)
    Insert Switch (pre-eq/fader, send is always active)
    Robust 48v Phantom Power
    Separately Switchable, Sweepable HP + LP Filters
    3 Band EQ with Sweepable Frequency
    Left/Right Pan Knob
    Input Pad (for connecting line level signals to mic preamp)
    Poarity Reverse Switch
    Line-In Selector (separate input, with unity gain)
    Mic Pre Gain
    4 Aux Sends
    Each aux is selectable pre/post via jumpers
    Channel ON Switch, with lighted indicator
    Solo Switch
    100mm Fader
    (2) Stereo Mix Bus Assigns (Red & Black)
    4-LED Input Meter
    Post-Fader Direct Output

    Stereo Line-Level Inputs (purchased in groups of 4)
    Stereo Insert Switch (pre-eq/fader, send is always active)
    Separately Switchable HP + LP Filters (stereo tracking)
    3 Band "Tone" Controls (stereo tracking)
    Input Balance
    Left->Right, Right->Left, and Mono Sum Switches
    Input Trim Knob
    4 Aux Sends
    Each aux is selectable pre/post via jumpers
    Channel ON Switch, with lighted indicator
    Solo Switch
    100mm Fader
    (2) Stereo Mix Bus Assigns
    4-LED Input Meter


    Master Section
    Stereo Mix Bus 1 Compressor (In/Out Switch, Threshold, Release Time, 4-Segment Meter)
    Stereo Mix Bus 2 Compressor (In/Out Switch, Threshold, Release Time, 4-Segment Meter)
    Oscillator / Talkback Assignment Switches (Aux 1-4, Mixbus 1,2)
    4 Aux Send Master Knobs
    Stereo Mix Bus 1 Master Fader
    Stereo Mix Bus 2 Master Fader
    Stereo Mix Bus 1 & 2 VU Output Meters

    Monitor Section
    Oscillator (On/Off, 100Hz, 1kHz, 10kHz, -20dB pad)
    Studio Monitor Source Selection (Ext, Aux 1-4*, Mix Bus 1,2)
    Headphone Level
    Speaker Level
    Speaker B Selector Switch
    Monitor Mono
    Monitor Mute
    Talkback Microphone
    Talkback Level
    Talkback Enable
    Headphone Jack


    Alt Output Section
    Alt Output "A" Summing Source Selections (Ext, Aux 1-4*, Mix Bus 1/2)
    Alt Output "A" Level/Mono/Mute
    Alt Output "B" Summing Source Selections (Ext, Aux 1-4*, Mix Bus 1/2)
    Alt Output "B" Level/Mono/Mute
    Alt Output Talkback Switch (talk to A, talk to B)

    Master Section Connections (Back Panel)
    Stereo Mix Bus 1 ("Black") Electronically-Balanced Output
    Stereo Mix Bus 2 ("Red") Transformer-Balanced Output
    Mono Aux 1-4 Outputs
    Stereo External Input
    Stereo Alt A Output
    Stereo Alt B Output
    Stereo Control Room "A" Speaker Output
    Stereo Control Room "B" Speaker Output
    Mono Oscillator Output
    External Linear DC Power Supply
    DB25M (Tascam pinout) Stereo Insert Send/Return for Mix Bus 1&2
    DB25M Master Logic (Talkback, External Mute, and Fader VCA Connections - future expansion)


    Input Connections (Back Panel)
    XLR Mic Inputs for Mono Channels
    DB25M (Tascam pinout) Line Inputs for (8) Mono Channels
    DB25M (Tascam pinout) Insert Sends for (8) Mono Channels
    DB25M (Tascam pinout) Insert Returns for (8) Mono Channels
    DB25M (Tascam pinout) Line Inputs for (4) Stereo Channels
    DB25M (Tascam pinout) Insert Sends for (4) Stereo Channels
    DB25M (Tascam pinout) Insert Returns for (4) Stereo Channels

    Frame
    Standard Frame Sizes: 12, 16, and 24-Modules. Others available by request.
    Optional Legs for 24-Module Frame.
    Rear connections are designed to support stereo and mono modules in groups of 4.
    Frame includes separate Linear Power Supply and 10' cable.
    Input, Monitor, Master & Alt Modules are individually removable for servicing/upgrades.
    Optional Output Transformers are available for Mixbus 2, Alt A, and Alt B Stereo Outputs.
    15 Degree Pitch for Fader Surface.
    Padded Wrist Wrest directly underneath faders for long mixing sessions.
    Full Size Keyboard Space with Cable Keyholes each side. 8.5" depth for desktop gear/controllers.
    Flat top for video and/or audio monitors.
    Input/output wiring may be customized with custom panels or additional transformers, etc.


    Furniture
    Optional 10-rack-space sidecar with same surface profile as 950mx.
    Optional straight or angled desk surfaces between sidecar(s) and 950mx.
    Optional 16-rack-space roll-around rack with same profile as 950mx.
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.