Sorry, the product JBL LSR6328P is not available anymore on Studio Economik's website.

Interested in other Monitoring products?

Do you want to see other JBL products?
We have a few suggestions you could be interested in;

Information

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. THX pm3 Approved. METAlliance Certified.

With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

Features

  • Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position.
  • RMC? Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
  • Differential Drive technology with dynamic braking for extended low frequency response and minimal
  • power compression.
  • Integrated bi-amplification with factory calibrated sensitivities.
  • Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise
  • pattern control.
  • Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
  • High-density baffle for low enclosure resonance.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Reinforced enclosure and convenient mounting points for mounted installation.
  • Integral handles facilitate ease of positioning.
  • Specifications

  • Frequency Response: 50 Hz - 20 kHz (+1, -1.5 dB)
  • Enclosure Resonance Frequency: 38 Hz
  • Low Frequency Extension: User controls, set to default, -3 dB: 46 Hz, 10 dB: 36 Hz
  • Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
  • Distortion, 96 dB SPL, 1m: N/A,
  • Mid-High Frequency (120 Hz - 20 kHz): N/A, 2nd Harmonic <0.6%, 3rd Harmonic <1%
  • Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
  • Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
  • Signal InputNeutrik "Combi" XLR-14-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (14" tip) produces outward woofer motion
  • Calibrated Input Sensitivity, XLR & 14": N/A, +4 dBu / +8 dBu 96 dB SPL / 1 m, -10 dBV 96 dB SPL / 1 m
  • AC Input Voltage: 100 / 240 VAC
  • AC Input Connector: IEC
  • Long-Term Maximum System Power: 220 W (IEC265-5)
  • Self-Generated Noise Level: <+10 dBA / 1 m Tonal-artifact-free
  • Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.