Excellent performance in a small package for ENG and DSLR video production is the purpose and intent of the LR receiver design.
Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended operating range. RF spectrum scanning displays accurate results on the LCD to make finding clear spectrum quick and easy.
The receiver is powered by internal AA batteries or with an optional battery eliminator. The top panel includes an IR port for transmitter setup. Firmware updates are enabled via a USB port on the side panel. The housing is made from a solid machined aluminum billet.
Band A1: 470.100 - 537.575 MHz
Band B1: 537.600 - 614.375 MHz
Band C1: 614.400 - 691.175 MHz
Tunes over a 75 MHz range*
Tracking front-end filters
Digital Hybrid Wireless® with compatibility modes for use with earlier transmitters
Compact size powered by two AA batteries or an optional battery eliminator
LCD with RF spectrum scanning
SmartSquelchTM noiseless muting adapts automatically for near/far operation
DSP-based pilot tone for squelch control
USB port for firmware updates
IR sync port for transmitter setup
Frequency selection steps: Selectable; 100 kHz or 25 kHz
Receiver Type: Dual conversion, superheterodyne
IF Frequencies: 243.950 MHz and 250.000 kHz
Frequency stability: ±0.001 %
Front end bandwidth: 20 MHz @ -3 dB
Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm), A weighted, 60 dB Quieting: 2.2 uV (-100 dBm), A weighted
Squelch quieting: Greater than 100 dB typical
Modulation acceptance: +/-100 kHz max.; varies with selected compatibility mode