The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system.
The KH 310 three-way active tri-amplified monitor features a Mathematically Modeled Dispersion Waveguide (MMD), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.
It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering.
Powerful alloy fabric dome Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion Fabric dome, neodymium magnet, midrange driver Long throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and ribbed surround Two-color + dimmable Neumann logo Compact sealed three-way cabinet design (magnetically shielded) One-piece front panel with no discontinuities Powerful analog class AB amplifiers with large headroom Independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils. Woofer soft clip and excursion limiters Production consistency due to individual hand-alignment in final test 4-position bass, low-mid and treble acoustical controls Wide range input gain and output level controls Ground lift Universal switched-mode power supply (100 ... 240 V) Extensive mounting hardware options Optional robust metal grille Optional transportation accessories
Free field frequency response: 34 Hz - 21 kHz, ± 3 dB Pass band free field frequency response: 36 Hz - 20 kHz, ± 2 dB Self-generated noise (with input gain set to 100 dB for 0 dBu): < 20 dB(A) at 10 cm Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m: > 85 Hz Max. SPL in full space / calc. in half space at 3% THD at 1m: 114.2 / 120.2 dB SPL (averaged between 100 Hz and 6 kHz) Bass capability: Max. SPL in half space at 3% THD at 1m 111.3 dB SPL (averaged between 50 Hz and 100 Hz) Max. short term SPL with IEC-weighted noise (IEC 286-5) at 1 m, in typical listening conditions: 113 dB(C) SPL Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair): 100 dB(C) SPL (full range), 107 dB(C) SPL (with subwoofer) Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair): 93 / 99 dB(C) SPL (full range), 94 / 100 dB(C) SPL (with subwoofer)
Bass / Midrange / Treble Class AB amplifiers, cont. (peak) output power*: 150 W (210 W) / 70 W (90 W) / 70 W (90 W) Controller design: Analog, active Crossover frequencies: 650 Hz / 2 kHz Crossover slope: 24 dB/oct, 4th order Equalization - Bass: 0, 2.5, 5, 7.5 dB Equalization - Low Mid: 0, 1.5, 3, 4.5 dB Equalization - Treble: +1, 0, 1, 2 dB Protection circuitry: Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters Infrasonic filter - frequency; slope: 15 Hz; 6 dB/oct Input: XLR, analog electronically balanced Impedance, electrically balanced: > 13k Ohms Input gain control (sensitivity): 0 dB to 15 dB Output level control: 94, 100, 108, 114 dB SPL CMRR: > 56 dB @ 100 - 15 kHz Max. input level: +24 dBu
Displays and indicators - power on Neumann logo "White" Displays and indicators - limit / clip Neumann logo "Red" Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz Power consumption - idle 24 W Power consumption - full output 300 W
Cabinet surface finish, colour: Painted wood and polyurethane, Anthracite (RAL 7021). Aluminum electronics panel, Black. Baffle cover: Optional removable metal grille Operating conditions: +10° C to +40° C (+50° F to +104° F), <90% RH, non-condensing Transport/storage condition: 25° C to +70° C (13° F to 158° F), <90% RH, non-condensing Drivers: Magnetically shielded Woofer: 210 mm (8 1/4") Midrange: 75 mm (3") Tweeter: 25 mm (1") Mounting points: 2 x M8 on side panels, depth from outside of cabinet 25 mm (1"). Rear panel screws for attaching LH 41 base plate. Rear panel bracket. Product dimensions (height x width x depth), mm (inches): 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2") Net volume, internal / external: 16.2 liters / 28.3 liters Product weight: 13.0 kg (28 lbs 11 oz) Packed dimensions (height x width x depth), mm (inches): 590 x 380 x 360 mm (23 1/4" x 15" x 14 1/8") Packed weight and cube: 16.8 kg (37 lbs 1 oz), 0.081 m³
Write a review about the Neumann KH 310 A
* Required fields
1 (Not for me)
will not be published
E.G.: Montreal, QC