The NPPA-TT-S is an "Easy Patch" Patch Panel with 2 x 48 TT (Bantam) jacks, half normalled bottom row and 288 solder terminals for fixed installations
All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting.
Caractéristiques
Innovative and compact patching system (just 1U high) for 19" rack mounting
Robustly housed in a black coated steel shell
High quality long life gold plated Neutrik prewired double jacks with drastically improved contact integrity
Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
Mixed normalling configuration can be done by jack pairs (see accessories)
Including top and bottom cover.
Spécifications
Electrical
Signal Type: Digital suitability acc. AES/EBU (3.072 Mb/s and 6.144 Mb/s)
Contact resistance: 20 mOhms
Dielectric strength: 1 kVdc
Frequencyrange: DC to > 50 MHz
Insulation resistance: > 1 GOhms
Channel separation:
> 100 dB @ 10 kHz, 600 terminated
> 40 dB @ 6 MHz, 110 terminated
Mechanical
Insertion force: nsertion force: < 10 N
Withdrawal force: > 8 N
Lifetime: > 5000 mating cycles
Locking device: Retention spring
Material
Contact plating: TRIBOR (0.2 µm AuCo over 2 µm NiP) (Jacks)
Contacts: Bronze (CuSn6) (Jacks)
Shell: PA 66 blend (Jacks)
Shell plating: Black
Environmental
Temperature range: -30 °C to +80 °C
Product specific
Dimensions: 482 x 44 mm (19'' x 1U)
Depth: 178 mm (7'')
Suitable connectors: 3 pole 4.4 mm (0.173") tiny telephone plug bantam type (NP3TT-*)
Channels: 2 x 48 jacks, half normalled, 288 solder terminals
