Active studio monitor pair with two PMC6-2 and two PMC8-2 SUB for near/midfield monitoring
This system combines the PMC6-2?s unrivalled clarity and resolution with an active sub to form a perfectly integrated full-range monitoring system that is ideal for all high-end music production.
In the case of the PMC6-2, configuring it as an XBD system reinforces the bass output of the main speaker?s LF drivers, greatly increasing headroom and extending the bass down to 25Hz, creating a system with a sense of effortless capability.
Configuring the PMC6-2 XBD system is simple; connect the input directly to the PMC6-2, and add an AES3 digital cable to carry the main monitor?s ?through? output down to the PMC8-2 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ?XBD? mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign browser-based software via the LAN connection, where both speakers appear as a single PMC6-2 XBD unit when linked.
3-way active, twin cabinet, mid-field reference monitor with ATL? bass loadingFrequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W, SUB(XBD) 2 x 400WAnalogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)Digital ?through? output (AES3 24-bit 96kHz)SoundAlign network control interface for single or group EQ & settingsSophisticated DSP crossover, driver protection, EQ, and delay/polarity optionsOptional dedicated 19? floor stands
PMC6-2 SPECIFICATIONS
Type:
Active 3-way nearfield reference monitor with ATL bass loading
Drive Unit Complement:
LF 2 x PMC 150mm (6?) studio 6 drivers
MF PMC 55mm (2?) soft dome mid-range
HF PMC 27mm (1?) soft dome tweeter
Effective ATL Length:
2m (6.6ft)
Frequency Response:
33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity:
+4dBu input signal = 98dB SPL @ 1m
Max continuous SPL:
109dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak:
SPL121dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Directivity:
H +/-50 degrees
V +60/-40 degrees (-6dB off axis @10kHz)
Input:
XLR switchable between analogue & digital AES3
Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance
Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate
- 110 ohm input impedance
Expansion card slot
- For future connectivity upgrades
Output:
XLR digital AES3 (fixed 24-bit @ 96kHz)
Network:
RJ45 for use with PMC SoundAlign web interface
Features:
Level Trim (+/-10dB)
High-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS)
Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults)
Latency:
2.4mS
Amplifier power per channel:
LF 2 x 400Wrms
MF 1 x 400Wrms
HF 1 x 400Wrms
Mains:
100 - 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle):
50W
Power consumption (max):
1500W
Cabinet dimensions:
H 400mm (15.7?)
W 430mm (16.9?)
D 372mm (14.6?)
Weight:
21.3kg (47lbs) each
Available Finishes:
Studio black
PMC8-2 SUB SPECIFICATIONS
Type
Active subwoofer with twin 8-inch bass drivers and ATL bass loading
Drive Unit Complement:
LF PMC 200mm (8?) studio 8 driver
Effective ATL Length:
3m (9.8ft)
Frequency Response:
25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
Sensitivity:
+4dBu input signal = 98dB SPL @ 1m
Max continuous SPL:
109dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak SPL:
121dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Input:
XLR switchable between analogue & digital AES3
Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate
- 110 ohm input impedance Expansion card slot
- For future connectivity upgrades
Output:
XLR digital AES3 (fixed 24-bit @ 96kHz)
Network:
RJ45 for use with PMC SoundAlign web interface
Features:
Level Trim (+/-10dB)
High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS)
Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults)
Latency:
2.4mS
Amplifier power per channel:
300Wrms
Mains:
100 - 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle):
25W
Power consumption (max):
300W
Cabinet dimensions:
H 266mm (10.5?) W 551mm (21.7?) D 440mm (17.3?)
Weight:
18.5kg (40.8lbs) each
Available Finishes:
Studio black