The ProAc Studio 100 is consistently selected by top recording engineers for near-field monitoring in major studios -ample testimony to its overall sound quality and neutrality at monitor reference levels.
Few compact loudspeakers offer such a clean uncoloured performance and remarkable transparency. With virtually flat frequency response and negligible distortion, the Studio 100 is one of the most accomplished compact performers on the market today.
The bass unit is unique. Manufactured exclusively for ProAc, it has a particularly linear motor assembly, superb magnet and chassis construction and a special centre pole plug. When precisely tuned in the cabinet this driver gives an incredibly natural bass quality and definition, combined with generous power handling.
The tweeter is a featherlight one-inch soft dome unit, once again specially manufactured for ProAc. Made from a new impregnated fabric, the dome itself is exceptionally light in construction giving the Studio 100 a distinctively uncoloured and transparent high frequency.
The high quality crossover network marries the two drive units seamlessly giving a spacious soundstage with almost tangible imagery. Only the finest components are used and the speaker is wired throughout with our own high-quality multi-strand wire. The cabinet itself is made from a composite material with walls of differing thicknesses and a new and more efficient heavy damping material ensures that the cabinets are practically inert.
Although the Studio 100 can be shelf-mounted, high mass stands with good rigidity are preferable for optimum results. The full potential of these thoroughbred designs will only be realised through the use of the highest quality partnering equipment.
ProAc Studio 100's specifications
Nominal Impedance
8 ohms Recommended Amplifiers
30 to 150 watts Frequency Response
35hz to 30Khz Sensitivity
88db linear for 1 watt at 1 metre Bass/Midrange
Driver 6 1/2" treated cone with special centre pole plug. Tweeter
1" (25mm) soft fabric dome with ferrofluid and rear loading. Mirror image offset. Crossover
Finest components on dedicated circuit board. Multi-strand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping. Dimensions
16" (406mm) high
8" (203mm) wide
10" (254mm) deep Weight
24 lbs (11kg) /cabinet Mode
Stand mounted Grille
Acoustically transparent crimplene Finish
Available in the following real wood veneers: Black Ash, Mahogany, Cherry and Maple.
Studio Economik UA Apollo NEWS! We are placing the 1rst order for UA Apollo right now, available end February. Limited quantity available on first shipment. Pre-orders available. Please contact us to get yours!
