HomepageCables & Accessories › Audio Adaptors
Prism Sound Over-Killer
In-Line XLR Soft-knee barrel limiter. 2x Barrels An Over-Killer is an XLR barrel version of the same switchable soft-clip limiter found on our revered audio interfaces. Designed to get more out of... View more
Free shipping in Canada

$460.00

Lectrosonics MCATA5MLEMO
Mic Cable Adapter TA5M TO LEMO for SSM TX Mic cable adapter; Converts standard TA5F microphones to LEMO connector for use with SSM Transmitter
Free shipping in Canada

$331.00

Shure A15TG
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present. The Shure A15TG Tone Generator... View more

$219.00

Shure A15PRS
The Shure A15PRS is a Switchable Phase Reverser. Reverses the phase (polarity) of a balanced audio signal. The Shure A15PRS reverses the phase (polarity) of a balanced audio signal. Typical use... View more

$109.00

Neutrik NADITBNC-FX
Digital impedance transformer adapter, Female XLR cable end 110 ohm input to female BNC 75 ohm output. Interface balanced and coaxial lines

$109.00

Schoeps MDZ10u
In situations where microphone inputs are overloaded, we recommend inserting the MDZ 10 into the signal path between the microphone cable and the microphone input. The advantage of this setup over... View more

$106.00

Shure A96F
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. The Shure A96F transformer connects microphones with an XLR-type connector to the... View more

$99.00

PSC FPSC0010G 600 Ohm Transformer Adapter Barrel
600 Ohm Transformer: Provides transformer isolation between equipment. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional sound... View more

$86.00

Avid Mini-DigiLink (M) to DigiLink (F) adapter
DigiLink Female to Mini-DigiLink Male Adapter. This DigiLink female to Mini-DigiLink male DigiLink Adapter fits the male end of any full-sized DigiLink cable. If you want to connect your Legacy Pro... View more

$80.00

Shure A15BT
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR. The Shure A15BT Bridging Transformer can be used to connect balanced and... View more

$79.00

Shure A15HP
The Shure A15HP is an In-Line High Pass Filter. Balanced XLR in-line filter that reduces low frequencies below 100 Hz. The Shure A15HP in-line filter passes mid and high frequencies while reducing... View more

$79.00

Shure A15RF
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables. The Shure A15RF reduces interference from AM radio stations that may bleed into microphone... View more

$79.00

Shure A95U
Line Matching Transformer, Low Impedance Male XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. This reversible transformer matches low- or high-impedance microphones to... View more

$79.00

Shure A95UF
The A95UF is a Line Matching Transformer, Low Impedance Female XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack. The Shure A95UF is a reversible transformer that matches... View more

$79.00

PSC FPSC0010A 48PH to 12T Adapter Barrel
48PH to 12T: Allows "12T" microphones to operate from mixers with 48PH power. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional... View more

$72.00

PSC FPSC0010F Hi Pass Filter Adapter Barrel
High Pass Filter: Provides a low frequency cutoff, -3dB @ 140 HZ, to prevent low frequency rumble. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs... View more

$71.00

PSC FPSC0010H Line Drying Adapter Barrel
Line Drying: Allows interfacing between wired intercom systems, and audio mixers by removing DC voltage. Professional Sound Corporation has designed and built a range of adapter barrels to meet the... View more

$71.00

Shure A15AS
The Shure A15AS is a Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. The Shure A15AS Switchable In-Line Attenuator reduces the... View more

$69.00

Shure A15LA
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input. The Shure A15LA 50 dB attenuator reduces the level of an audio signal by 50dB.... View more

$69.00

PSC FPSC0010D 48PH to 12T Line to Mic Adapter Barrel
48PH to 12T: Allows "12T" microphones to operate from mixers with 48PH power. Professional Sound Corporation has designed and built a range of adapter barrels to meet the needs of the professional... View more

$67.00

Cable Techniques CT-AX3FC70-15
15" Low-Profile XLR-3F Female to Low-Profile TA3M "Mini XLR" 3-pin Male cable for Microphone or Wireless to Canon EOS C70 Audio Balanced Audio Input 15" Low-Profile Right Angle XLR-3F to Low-Profile... View more

$54.00

RØDE VXLR Pro
3.5mm mini jack to transformer balanced 3-pin XLR power converter, allows the use of microphones requiring 3-5v to be used on 24-48v phantom power The RØDE VXLR Pro is a female TRS mini-jack to male... View more

$52.99

Save 19.7%, MSRP $65.99
Hosa GMS-274
Hosa GMS-274 is an adaptor designed to add an on/off switch to a dynamic microphone. It is ideal events during which a single microphone is shared.

$45.19

Hosa ATT-448
Hosa ATT-448 attenuates a dynamic microphone. Selectable -20 dB, -30 dB, or -40 dB attenuation make it ideal for karaoke, public speaking, or where a single microphone is shared. ATT-448 Input... View more

$44.40

Save 9%, MSRP $48.79
Hosa MIT-435
Hosa MIT-435 is an adaptor designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. MIT-435 Mic Transformer, XLR Female LO-Z... View more

$44.00

Neutrik NA3JJ
The NA3JJ is a 1/4" stereo jack to 1/4" stereo jack coupler adapter

$43.00

Canare BCJ-XJ-TRC
The BCJ-XJ-TRC is a 110-75 ohm Digital Audio Impedance Transformer, XLR3(F) - BNC Jack

$39.00

Save 15.2%, MSRP $46.00
Shure A120S
A120S is an In-Line On/Off Switch. In-line, balanced, locking or momentary switch for a microphone.

$39.00

Hosa MIT-129
Hosa MIT-129 is an adaptor designed to match 50K output impedance to 200R input impedance. It is ideal for connecting a hi-Z instrument to a microphone input. MIT-129 Mic Transformer, 1/4" Female... View more

$39.00

Canare BCJ-XP-TRC
The BCJ-XP-TRC is a 110-75 ohm Digital Audio Impedance Transformer, XLR3(M) - BNC Jack

$39.00

Save 13.3%, MSRP $45.00
 
Now accepting
Financing available
Like us
Follow us
©2004-2024 - Studio Economik Inc.® All Right Reserved.