We have a few suggestions you could be interested in;
A four-band inductor-based EQ. Designed to work in standard "500" racks
A modern update of the classic "swinging inputs" console EQ, with four easy to use bands. Each band uses a high quality inductor and carefully selected caps to give two switchable frequencies. The bands are carefully shaped and spaced to be musical, even at full boost or cut. The highest band can be switched from bell to shelf, to boost frequencies extending well beyond 20kHz. The lowest band can also be switched from bell to shelf, reaching down into the subsonic range.
There are illuminated pushbuttons for additional fixed low (red) and high (yellow) cut filters. A relay true bypass (green) allows for easy comparison with unprocessed source material. With the low and high cut switched out, and all four bands set to 0, the frequency response is +/- 0.25dB from 15Hz to 25kHz, and -3dB at 60kHz.
With specialized input and output transformers, the Odd has plenty of headroom, even at full boost. The entire circuit is discrete, with no electrolytic capacitors in the signal path, and no servo amps. With only two active stages, the current draw is low enough to work in any rack, and leave plenty of juice for other modules.
High frequency switchable from bell to shelfHigh frequency 12kHz / 8kHzHigh-mid frequency 4kHz / 1.8kHzLow-mid frequency 650Hz / 300HzLow frequency 150Hz / 75HzLow frequency switchable from bell to shelfEach band boost or cut by 12dBSwitchable High cut at 12kHzSwitchable Low cut 60HzRelay True BypassTricolor LED level meterTransformer balanced in and outDiscrete signal pathNo electrolytic caps in signal pathCurrent consumption: 60mAOver Current Resettable Fused (prevents any module problem from affecting your rack)ROHS - Lead Free
For easy serviceability and tweaking, the Purple discrete opamps can be replaced with any standard discrete opamp or a DIP-8 IC.
Pin 1: Chassis GroundPin 2: Output A +Pin 3: NCPin 4: Output A -Pin 5: Audio GroundPin 6: NCPin 7: Input -Pin 8: Input -Pin 9: Input +Pin 10: Input +Pin 11: Audio GroundPin 12: +15 or 16VDC 60maPin 13: Audio GroundPin 14: -15 or 16VDC 60maPin 15: NC (+48VDC)
©2004-2016 - Systemes Guinois® Inc. All Right Reserved.