Building on the success of our K Series, the KW Series represents the next evolutionary step in wood enclosure loudspeakers. Powered Sub Woofer 18" - 1000w
Onboard mixer with two combo XLR and ¼" inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output.
Extensive DSP featuring DEEP? and Intrinsic Correction? enhances system performance:
DMT? (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.Intrinsic Correction?, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.DEEP? and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.GuardRail? protection protects both the amplifier module and your performance from unnatural and destructive clipping.
18" subwooferMaximum SPL 135 dB peak1000 watt Class D continuouspowerTour-grade 16 gauge steel grillesRugged, texture-painted birch enclosuresThreaded pole socketSpeaker mounting pole included (35 mm diameter, 36 inches (91 cm) long, M20 thread.)Comfortable ergonomic handles
Configuration: 18" subwooferTransducer: 18" cone transducerFrequency Response (-6 dB): 38 Hz - 124 HzFrequency Range (-10 dB): 34 Hz - 143 HzMaximum SPL1: 135 dB peak
Amplifiers:
Power Output2: 1000 W Class D continuous, 2000 W peakInput Impedance (ohms): XLR / ¼": 38k balanced / 19k unbalancedControls: Power, Gain, LF Mode (Normal/DEEP?), Polarity (Normal/Reverse), Front LED (On/Off/Limit)Indicators: Power, Signal, Standby, LimitConnectors: Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connectorCooling: On demand, 50 mm variable speed fanAmplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRailTransducer Protection: Thermal limiting, excursion limitingAC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 HzAC Power Consumption: (1/8 Power): 100 VAC, 2.3 A, 120 VAC, 2.01 A, 230 VAC, 1.13 A
Enclosure
Material: 15 mm painted birch plywoodFinish: Black textured paintGrille: Rugged Powder-Coated Steel GrilleDimensions (HWD): 20.1" x 23.4" x 29.9" with casters, 510 mm x 595 mm x 761 mm with castersWeight (Net): 88 lb (40 kg)Available Accessories: KW181 COVER