Shopping cart | Login |
Languages
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.
HomepageCables & AccessoriesD.I. › Radial Engineering JX44
Radial Engineering JX44

The Radial JX44 Air Control is a wireless signal manager for concert stage that lets you remotely control 4 guitar inputs and 6 amp outputs at once.

The Radial JX44 Air Control is a guitar signal manager designed for the most demanding professional concert stages where wireless guitar systems, acoustics, effects and multiple amplifiers are used simultaneously.

To ensure the highest quality signal transfer, the four instrument inputs employ Radial's unique class-A buffering with 100% discrete components throughout. Inputs A & B are equipped with Drag™ Control load correction that lets you 'dial in' the perfect load on the pickup for the most natural tone. Inputs B &C are equipped with a trim level that let you quickly balance signal levels when using wireless systems or active guitars.

There are two effects loops: The first is a 'local' effects loop to interface drawer-filled pedals or multi-effects processors. The second is a long-haul balanced interface that provides a noise-free connection to-and-from distant pedalboards to distances of 100 meters when combined with a stand-alone Radial SGI-44. A built-in Radial direct box works double duty as an acoustic guitar output for the PA or as a dry feed for recording. With the JX44, you can record a 'clean guitar track' and use the built-in Radial X-Amp in post production to Reamp the signal to multiple amplifiers and pedals at the same time.

Up to six guitar amplifiers may be used at once. Outputs 1 and 2 are single while outputs 3 and 4 are doubled-up to drive multiple stacks. All outputs are transformer isolated to eliminate hum and buzz from ground loops. These also feature a 180º polarity reverse switch to set the amps in phase. Selecting the amps can be done via the front panel or by using the optional JR5 remote control. This five function footswitch is equipped with internal memory that lets you store 4 amp scenes and recall them with a single foot action. A second JR5 can also be used to activate or mute guitars. To enhance stage functionality, the JX44 is equipped with a separate tuner out. Signals can be muted using the front panel switch, a latching footswitch, or with the JR5 remote, giving you complete control right where you want it. Should ever a problem occur, a front panel 'panic' button hardwires input-A to output-1 for direct-to-amp connection. This will even work if the JX44 power goes down. With a Radial JX44 in your rig, the show will go on!
Features
  • Control as many as 4 guitars and 6 amps at once
  • Programmable with remote control for pedalboard
  • Built in Radial DI box, SGI line driver and X-Amp
  • Transformer isolated to eliminate ground loops
  • Specifications
  • Audio circuit type : Active 100% discrete class-A with transformer isolation
  • Frequency response : 20Hz ~ 20kHz (± 2.5dB)
  • Signal to noise ratio : 106dB (0dBu input)
  • Dynamic range : 118dB (unbalanced input to unbalanced output)
  • Noise floor : -106dBu (unbalanced input to unbalanced output)
  • Maximum input : +12dBu (unbalanced input to unbalanced output)
  • Total harmonic distortion : 0.008% @ 1k (unbalanced input to unbalanced output), 0.001% @ 1k (balanced DI mic-level output)
  • Inter-modulation distortion : 0.02% @ -20dBu (unbal. input to unbal. output)
  • Input impedance : Variable from 10k Ohms ~ 1 megaOhm
  • Output impedance : ¼" unbalanced: 3k Ohms; XLR balanced: 150 Ohms

  • Features
  • Instrument inputs : Four ¼" unbalanced selectable inputs
  • Reamp/SGI input : Bal. XLR line-level X-AMP Reamping / SGI input
  • Amplifier outputs : Four ¼" programable and isolated amplifier outputs
  • Direct box output : Isolated mic-level out with phase rev. & gnd lift
  • SGI output Bal. SGI (Studio Guitar Interface) output
  • Tuner output : Unbal. ¼" tuner output
  • Effects loop : Unbal. ¼" effects loop I/O
  • Phase reverse : 180º polarity reverse (amplifier outputs)
  • XLR configuration : AES standard (pin-2 hot)

  • General
  • Power : +15VDC/400mA adapter included
  • Construction : 14 gauge steel chassis & outer shell
  • Finish : Durable powder coat
  • Size : 17.5" x 6" x 1.75" (44.5 x15.25 x 1.75cm)
  • Weight : 10.7 lb (4.8kg)
  • Shipping size : 22" x 10" x 4.5" (55.9 x 25.4 x 11.4cm)
  • Shipping weight : 11.3lbs (5.1kg)
  • Conditions : For use in dry locations only between 5°C and 40°C

  • Accessories
  • JR5 Footswitch : Floor pedal selects inputs or outputs and programs
  • SGI44 : Long distance pedalboard interface
  • Reviews
    Related products
    Price *
    list_price $1750.00
    sale_price $1599.00
    Free shipping in Canada. Conditions
    Additional information
    For more information about the JX44, please visit the website of Radial Engineering
    Radial Engineering Logo
    ©2004-2016 - Systemes Guinois® Inc. All Right Reserved.