Shopping cart | Login |
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.
HomepageCables & AccessoriesD.I. › Radial Engineering TankDriver 500
Radial Engineering TankDriver 500

A unique module that lets you to drive a balanced line level signal through the reverb tank in your Fender Twin! Drive spring reverbs of all types.

The Radial Tank Driver is a wonderfully unique 500 series module that allows you to drive a balanced line level signal through the reverb tank in your Fender Twin amp! Yes, an affordable interface designed specifically to drive spring reverbs of all types and deliver the long trailing shimmering effect that is only possible with a true spring.

The design begins with a transformer coupled output driver with normal and high settings for new and old spring reverbs alike. Separate drive and return controls allow signal optimization to maximize signal to noise. To further tailor the tone, the Tank Driver is equipped with two tone controls that let you adjust high end shimmer and low frequency boom. (Let's face it... what else would you call it)

Plug in an instrument and hear spring reverb with less noise and wider bandwidth than ever before. Plug a mic pre into it to add spring reverb to voice. Try it with drums to create unique sonic spaces. And since you probably have more than one amp in your studio... you will soon be using different reverbs for different tracks.

The Radial Tank Driver... Hachtung Baby!
  • Pro-balanced spring reverb interface
  • Use the spring reverb in your guitar amp
  • Add unique spring reverb effects to recordings
  • Optimized drive circuit for low noise
  • Specifications
  • Circuit type - drive : opamp with discrete transistor isolated output
  • Maximum input - rear panel XLR input : +19dBu
  • Maximum ouput - rear panel XLR ouput : +26dBu
  • Dynamic range - drive section : 101 to 115dB (varies with frequency)
  • Frequency response : Shaped for spring reverb tanks
  • Gain - drive switch boost selected : +10dB (when activated)
  • Input impedance - front panel receive input : 10K Unbalanced
  • Input impedance - rear panel XLR input : 15K Balanced
  • Dry intermodulation distortion : 0.0028%
  • Wet intermodulation distortion : 0.0021%
  • Noise - drive section : -100dB (below 0dBu)
  • Omniport function : Line level unbalanced effects loop
  • (Tip send - ring recei)
  • Front panel output impedance : 1.5K Ohms
  • Rear panel XLR output impedance : 200 Ohms
  • Power requirement : 65mA (maximum all LEDs)
  • THD + N - receive section : <0.01% @ -30dBu input level
  • Shipping size 9 x 6.5 x 2 (inches)
  • Weight 1.5 lbs. (0.7 kg)
  • Conditions : For use in dry locations only between 5°C and 40°C
  • Reviews
    Free shipping in Canada. Conditions
    Additional information
    For more information about the TankDriver 500, please visit the website of Radial Engineering
    Radial Engineering Logo
    Like us
    Follow us
    Now accepting
    ©2004-2018 - Systemes Guinois® Inc. All Right Reserved.