Radial Engineering Twin Iso
UPC/EAN #676101035434
MPN #R800 1024
$389.99
Économisez 16.7%, Prix suggéré $468.00
$275.00 (Usagé)
Line level isolator, passive 2 channel balanced with Jensen transformers
The Radial Twin-Iso is a high performance two channel balanced line-level isolator for professional touring, sound installation, broadcast and studio that provides isolation between various pieces of audio equipment such as consoles, amp racks, remote towers and recorders as a means of eliminating hum and buzz caused by ground loops.
Central to the Twin-Iso are two high performance Eclipse transformers. These stellar audio engines are modelled after Deane Jensen's original designs to deliver an exceptionally linear response at all frequencies and are capable of handling as much as +21dB without distortion. Placed in between the audio source and destination, they assure absolute signal integrity is retained no matter what the program material.
As with all Radial products, the Twin-Iso is road-ready to handle the most abusive environments. It features 14 gauge steel I-beam construction and an innovative book-end design that creates a protective zone around switches and connectors. A full bottom no-slip pad provides mechanical isolation from vibrations while adding electrical insulation between electrically charged devices. When combined with the J-Rak or J-Clamp, the Twin-Iso easily integrates into 19" rack systems or may be permanently mounted inside racks or under podiums.
The Twin-Iso solves noise problems with plug & play simplicity while delivering exceptional audio signal integrity.
Caractéristiques
Stereo isolator, withstands up to +21dB without distortionEliminates hum and buzz caused by ground loopsSuitable for balanced & unbalanced signalsExceptionally linear response from 20Hz to 20kHz
Spécifications
Audio circuit type : Passive line-level isolation, transformer basedNumber of channels : Stereo (dual mono)Frequency response : 10Hz ~ 50KHz (± 1dB)Dynamic range : 135dBMaximum input : +21dBu @ 1kHz, 1% THD+NTotal harmonic distortion : 0.001% @ 1kHz, +4dBu outputPhase deviation : 0.5° @ 100Hz; 3° @ 20HzInput impedance : 600 Ohms, balancedOutput impedance : 600 Ohms, balanced
Features
Transformer : Custom wound Eclipse ET-LD2High pass filter : -3dB @ 100Hz (12dB.Oct.)Ground lift : Disconnects XLR pin-1 at isolated outputXLR configuration : AES standard (pin-2 hot)Connectors : XLR-F inputs; XLR-M outputs
General
Construction : 14 gauge steel chassis & outer shellFinish : Durable powder coatSize: (W x H x D) 84 x 127 x 48mm (3.3" x 5.0" x 2")Weight : 0.70 kg (1.55 lbs)Shipping size : W x H x D: 102 x 76 x 165mm (4" x 3" x 6.5")Shipping weight : .87 kg (1.92 lbs)Power : Passive, no power requiredConditions : For use in dry locations only between 5°C and 40°C
Écrire une évaluation à propos du Radial Engineering Twin Iso
Voir plus de produits pour la marque
Radial Engineering
