A professional studio microphone with a 1" capsule incorporating three-position pick-up patterns, pad, and high pass filter switches conveniently located on the mic body.
The NT2-A carries on the tradition forged by the now legendary RØDE NT2.
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.
Caractéristiques
Large 1" HF1 gold sputtered capsule
On body control of polar pattern, HPF and PAD
Three position variable polar pattern - Omni, Cardioid or Figure 8
Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
Three position PAD - 0dB, -5dB or -10dB
Ultra low noise
Internal capsule shock mounting
Includes RØDE SM6 shock mount, pop filter and dust cover
Designed and manufactured in Australia
Spécifications
Acoustic Principle : Pressure Gradient
Active Electronics : JFET impedance converter with bipolar output buffer
Capsule : 1.00"
Polar Pattern : CardioidFigure 8 - picks up from the front and rear and rejects sidesOmnidirectional - picks up all sides equally
Address Type : Side
Frequency Range : 20Hz - 20kHz
Output Impedance : 200
Maximum SPL : 147dB SPL (@ 1kHz, 1% THD into 1K load)
Maximum Output Level : 16.0mV
Sensitivity : -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) : 7dB-A
Power Options : +24V phantom power+48V phantom power
