The dBooster is a phantom-powered ribbon and dynamic microphone signal boost and impedance buffer
The dBooster has two gain settings, 12 dB and 20 dB, allowing you to dial in just the right amount of in-line gain for your different singers and instruments. The 20 dB setting gives loads of clean boost for recording soft instruments and singers, but when your singer is wailing or you use the dBooster on high volume instruments like electric guitar, switch it down to 12 dB to keep from overloading your preamp or digital interface.
The dBooster's Class A input stage delivers crystal clean gain with virtually no noise or self-distortion.
The dBooster's low-impedance output keeps things clean in the studio and also shines on live stages, driving long cable lengths and difficult loads like mic splitters and vintage-style preamps with no loss of gain, no increased distortion, and excellent headroom.
The dBooster gives excellent results with Royer R-121s, R-10s and stereo SF-12s. It also smokes on SM7s and other dynamic mics!
The dBooster is built in the USA and ships from our Burbank headquarters.
Switchable 12dB/20dB gain
Ultra-low noise, ultra-low distortion
Class A input stage
Safe for use on all ribbon mics
Wide frequency bandwidth
Retains sound quality on long cable runs
Maintains headroom and gain regardless of load
. Safe for use on all ribbon mics
. Increases headroom at the preamp
. Provides true electrical isolation
. Protects ribbon mics from
. Minimizes mic loading
. Capable of driving difficult loads,
such as mic splitters and vintage
style preamps, without increased
distortion or loss of gain
. Miking any low-volume sound source (acoustic instruments, vocals, etc.)
. Recording direct to a DAW interface
. Use on long cable runs to retain sound quality