A Stereo Set of matched MK2 (Near-Field Omni) capsules delivered with CMC 6Ug bodies, windscreens, stand adapters and a wooden case.
SCHOEPS offers pairs of our best-selling "Colette"-series microphones in sets. Each wooden case contains two complete microphones with selected, matched capsules, SG 20 stand adapters, B 5 D windscreens and in most cases, CMC 6 analog microphone amplifiers.
The part of each stand adapter that holds the microphone is made of soft plastic, while the base is metal. The foam windscreens have an inner construction which makes them considerably more effective than typical windscreens of their size, while their surface treatment lends them a "high-class" appearance.
The modular Colette series encompasses many more capsule and amplifier types than are offered in these sets. Combinations of these other capsule and amplifiers, or the extensive range of accessories, are not available as sets,
Please note that there is some directivity at high frequencies due to the physics of sound wavelengths. Thus even with an omnidirectional microphone, it still matters which way the capsule is "aimed."
The MK 2 is often used for acoustical measurement, an application for which it has gained a considerable reputation.
A mechanical adapter (type AMBK 1, from 20 mm to 1" diameter) is available for calibration with B&K devices. Please note that because of dimensional tolerances, only the nickel-finish version of the MK 2 can be used with this adapter.
MK 2 Stereo Set
very flat frequency response
corrected for a free sound field
for use close to the sound source (frontal sound
often preferred for relatively close miking of instruments, vocalists, etc.
(2) CMC 6 w/ (2) MK 2 Omni Capsules
(2) SG20 Stand Clamps
(2) B5 D Popscreens
(1) Wooden Case
Frequency range : 20 Hz - 20 kHz
Sensitivity : 16 mV/Pa
Equivalent noise level (A-weighted) : 11 dB-A
Equivalent noise level (CCIR) : 23 dB
Signal-to-noise ratio (A-weighted) : 83 dB-A
Maximum sound pressure level at 0.5% THD : 130 dB-SPL