The Sennheiser E 908 B-EW is a professional cardioid condenser gooseneck for superb definition. For wind instruments, congas, drums with free-floating suspension
Easily mounted/positioned. Intelligent preamp for cable. Phantom power. Level check.
e 908 B ew: for wireless miking of saxophones using an evolution wireless instrument transmitter
Solid, focused and precisely positionable.
The high-end sound of a condenser microphone is combined with the features of professional stage equipment to make the e 908 a small, highly flexible marvel. With an open and high-definition character, it creates surprisingly forceful sounds. It transmits the attack in a very clear and defined manner while structure-borne noise is reliably suppressed. Thanks to its shock-mounted head, gooseneck and special clips, the e 908 can be quickly attached and precisely oriented to the sound source. Despite its delicate form, the microphone is ruggedly constructed and easily takes even hard hits.
The evolution e 908 instrument microphone is available in four variants:
as e 908 D for drums and percussion
as e 908 B for wind instruments, congas, and drums with free-floating suspension system
as e 908 B ew for the wireless miking of saxophones using an evolution wireless instrument transmitter
as e 908 T ew for the wireless miking of trumpets using an evolution wireless instrument transmitter
Caractéristiques
Condenser microphone
High-end sound and precise definition
Simple mounting thanks to practical clips
Precise orientation with gooseneck microphone boom
Protection against impact and handling noise
Intelligent MZA 900 P phantom powering adapter (only B and D versions)
Can be operated with an evolution wireless instrument transmitter
Spécifications
Equivalent noise level: 39 dB (A) Dimensions: Ø 47 x 193 mm Connector: e908 B ew & T ew = 3,5mm mini jack Frequency response: 40 - 20000 Hz Weight: ca. 140 g Sensitivity in free field, no load (1kHz): 0,56mV/Pa (e 908T-ew) Nominal impedance: 100 Ohm (e908B & e908D) Min. terminating impedance: 2000 Ohm (e908B & e908D) Phantom powering: 12 - 48 V / 3 mA (e908B & e908D) Max. Sound pressure level (active): e908B-ew = 30 dB(A), e908T-ew = 39 dB (A) (equi) / 147 dB (max)