Flexibility is the outstanding feature of this plug-on transmitter that turns every wired microphone into a freely mobile wireless one. Thank to its phantom powering the SKP 300 G3 can be used with condenser and dynamic microphones alike. With up to 24 parallel frequency banks, switchable transmission power, wireless synchronization via infrared and, last but not least, its sturdy metal housing the SKP 300 G3 is perfectly fit for the demanding professional routine. And a crystal-clear sound is provided by the HDX compander.

Available in three frequency ranges:

Range A 516...558 MHz

Range B 626...668 MHz

Range G 566...608 MHz.

What's in the box

1 SKP 300 G3 plug-on transmitter

2 AA 1.5 V batteries

1 instruction manual

1 supplementary frequency sheet

1 supplementary RF power sheet

P48 phantom power for easy use of any cabled mic

Plug-on transmitter with XLR-3F connector for quick use, no visual interference of cables

Rugged metal housing for rough use

Up to 42 MHz switching bandwidth for flexible use at different locations

RF frequency range : Range A 516...558 MHz, Range B 626...668 MHz, Range G 566...608 MHz.

Dimensions : 105 x 43 x 43 mm (4.1 x 1.7 x 1.7 in)

Compander : HDX

Audio-XLR connector : XLR-3 female

Frequency response : 80....18000

THD, total harmonic distortion : < 0,9 %

Weight : 195 g (6.9 oz)

Phantom powering : 48 V +/- 2 V

Signal-to-noise ratio : 120 dBA (@ 1 mV peak deviation)

RF frequency range : 516..... 865 MHz

RF output power : 10/30 mW

Switching bandwidth : max. 42 MHz

Peak deviation : ±48 kHz

Nominal deviation : ±24 kHz

In compliance with : CE, FCC, IC

Operating time : > 8 h (30mW HF, without PG 48)

Modulation : FM

Carrier frequencies : 1680

Input voltage range : mic 1,2 V max