Electronically balanced ultra-high bandwidth Mic input with +20dB to +70dB gain controlHi-Z and Pad Switches on Mic Amp InputDedicated Additional XLR Line InputVariable Harmonic Drive circuit adds a controllable blend of 2nd or 3rd Harmonic distortionDedicated Trim control after the VHD stageClassic Listen Mic Compressor with fixed attack and release curvesÂ... ideal for drumsHigh and Low-Pass Filters
Physical: *
Depth : 200mm / 7.9 inches : including front panel knobs, excluding connectors
275mm / 10.9 inches : including front panel knobs and connectors
Height : 171mm / 6.75 inches
Width : 35mm / 1.4 inches : front/rear panels
49mm / 1.9 inches : overall width (front and rear panels are offset)
Weight : 260g / 9.5 ounces
Boxed size : 190mm x 290mm x 70mm / 7.5" x 11.5" x 2.5"
Boxed weight : 460g / 16.5 ounces
* All values are approximate
EQ Filters:
Frequency range : Slope
HF (Low Pass): : 20kHz - 3kHz (-3dB point) : 12dB/Octave
LF (High Pass): : 15Hz - 350Hz (-3dB point) : 18dB/Octave
Performance Specification*
Microphone Amplifier Performance:
Gain : Continously variable from +20dB to +70dB
Independently switchable 20dB Pad available
Input Impedance : Continously variable from 1k2 to 10k
Output Headroom : > +26dBu at onset of clipping
THD + Noise : (-18dBu applied, +28dB gain) : < 0.2% (20Hz - 20kHz)
With VHD, adjustable between : < 0.2% and 5% (1kHz - 20kHz)
Frequency Response : 20Hz to 20kHz : +0.3dB
50kHz : -3dB
150kHz : -3dB
Equivalent Input Noise : (input terminated with 150) : < -126dB at maximum gain
< -80dB at minimum gain (with Pad 'IN')
Common Mode Rejection : (-10dBu applied, +30dB gain) : > 75dB from 50Hz to 1kHz
> 65dB at 10kHz
Line Input Performance:
Gain : Continously variable from -24dB to +24dB
Input Impedance : 10K
THD + Noise : (-24dBu applied, +0dB gain) : < 0.05% from 20Hz to 20kHz
-3dB at 50kHz
Frequency Response : 20Hz to 20kHz : +0.1dB from 20Hz to 20kHz
50kHz : -3dB
Equivalent Input Noise : (Input terminated with 150) : -90dB
* See User Manual for measurement conditions & references