Creon is designed to operate with your Digital Audio Workstation. But you can also do a lot with it as a stand-alone device: plug in an instrument and play.
Mix your own monitor signal with playback or guide tracks from any source. What you are playing is not bad Turn on the DAW and record it.
Recording Channels
2 microphone inputs (XLR)
1 instrument input (TS)
2 balanced line inputs (TRS)
Two channels can be recorded simultaneously.
Playback Channels
2 channels via USB (DAW 1|2)
Analog Inputs (Sources)
2 TRS line input channels (balanced)
2 RCA line input channels (unbalanced)
Digital Input
1 USB
Analog Output
Speaker | Main Out (2x XLR, balanced)
1 headphone socket (TRS)
Digital Output
1 USB
Hardware
USB 2 audio system
High-performance, 32 bit microcontroller
24 bit audio processing
2 input and 2 output channels, up to 192 kHz
Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Fixed master clock for lowest jitter
True 1:1 audio, no sample rate conversion or clock recovery
Software
Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
No driver required for Mac
USB Audio Class 2.0 compliance (asynchronous mode)
Low-latency Windows ASIO and WDM driver
Multi-application mode, simultaneous ASIO and/or WDM playback
Driver feedback synchronization to hardware clock
ASIO control panel for Windows