The DR-701D is TASCAM's flagship recorder for single-shooter video production. A timecode generator is included for location reference, which can be jam synced in SMPTE.
The HDMI in and out allows a DSLR camera to start recording on both devices, and video clock prevents drift between sound and picture.
Four mic inputs can be individually recorded and mixed to a stereo track, for a total of six-track recording. For additional tracks, multiple units can be cascaded together. The lightweight yet rigid chassis is forged from a magnesium alloy. Tripod mounts on the top and bottom of the unit allow the unit to mount under a camera, attach to a follow-focus cage, or used stand-alone.
Designed for the needs of professional filmmakers, television producers, advertisers, and documentarians, the DR-701D packs high quality multitrack recording into a package compact enough for use with any camera.
SD/SDHC/SDXC cards used for recording media.6 maximum simultaneous recording tracksMONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modesRecording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)Built-in original TASCAM HDDA mic preamps provide high audio qualityInput levels can be adjusted separately for each trackXLR/TRS inputs support +4dBu line level and 24/48V phantom powerClock and record start/stop can be synchronized with a camera using the HDMI portDR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line outputCascade function using HDMI connections allows multiple DR-701D transport and monitoring operationsSMPTE Timecode can be input through the TC IN connector to add recording start times to filesTimecode generator (RTC) allows recording start times to be added to files even when there is no timecode inputPlug-in power mics and high output mics (EXT IN 1/2) supportedOUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR cameraIN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701DHigh quality audio output through a line output jack separate from the headphones jackHeadphones jack with 50mW+50mW maximum outputTripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) includedHandles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strapTransport and SLATE buttons made of rubber suppress noise during operationHOLD switch prevents misoperation128x64-dot graphic LCD with backlightLED lights have high visibility even in direct sunlightHigh-speed transfer of files to computers possible using USB 2.0Micro-B type USB cable includedPowered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)BP-6AA external battery pack (sold separately) enables operation for even longer timesOptional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channelsGANG function allows the levels of multiple channels to be controlled simultaneouslyIndividual channel trim settings shown5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequenciesMultiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)Delay function can compensate for distances between mics (+/-150 ms)Mid-side decoder function enables use with mid-side stereo micsSlate tone insertion functions (AUTO/MANUAL)Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)
GTIN (UPC/EAN) : 043774031986
Manufacturer Part Number : DR-701D