Shopping cart | Login |
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.
HomepageOutboardDigital Dynamics Processors › TC Electronic Finalizer 96K
TC Electronic Finalizer 96K

Finalizer 96K dramatically enhances your material, creatingthat "radio ready" sound that was previously unattainable outside aprofessional mastering house.

Finalizer 96K builds on our multi-award-winning mastering technology and delivers an unprecedented level of clarity, warmth and punch to your mix. 96 kHz internal and external processing truly puts the world of professional mastering within reach of every studio - large or small.
  • Punch - Add a Touch of Magic to Your Production. Make it Stand Out from the Crowd.
  • Clarity - 96 kHz Internal and External Processing. No Compromises Allowed.
  • Versatility - More than Multi-band Compression. A Complete Range of Mastering Tools.

  • True 24 Bit / 96 kHz
    We have equipped Finalizer 96K with true 24bit resolution A/D and D/A converters, capable of translating AES/EBU, S/PDIF and Tos input to the Finalizer's internal or external rate. You also get full Up- and Down Sampling, and you can set the Sample Rate Conversion rate to 32, 44.1, 48, 88.2 or 96kHz.

    The ADAT interface enables you to choose 2 ADAT channels and direct them to other ADAT channels. This enables you to bounce tracks while processing the sound with the Finalizer's unique features. Finalize your mix and turn it into a masterpiece.

    Simple Versatility
    Finalizer 96K gives you all the features you need to add the finishing touch of magic to your mix. The multi-band processor will make your mix sound punchier and crispier, allowing you to easily turn your demo tapes into mastered recordings.

    If you have a particular external device that you want to add to the arsenal of mastering tools, you can simply insert it via either the analog inputs or digitally via AES/EBU, S/PDIF or Tos-link. Likewise, you can also insert internal effects - for instance if you want to refine the overall EQ before compressing the signal.

    Analyze This!
    Finalizer 96K comes with a wide range of extremely useful analyzing functions: Phase Correlation Meter, Level Flow Meter, Peak Hold Meter and Digital I/O Status. Even a Calibration Tone Generator is included with Finalizer 96K.

    Make your mastering decisions on monitoring and serious analyzing!

    The successful Wizard function is naturally a part of Finalizer 96K, and it will immediately calculate an optimal setting for your material, making mastering easy.

    However, if you prefer total control, you can also delve in to the tiny details with more than 90 parameters.

    Do the Dither
    Dithering is very important when you interface digitally. The output resolution of Finalizer 96K is 24bit, but you can Dither from 8-22bits.

    If your signal is in Stereo, Uncorrelated Dither is the best choice, if it is in Mono, Correlated Dither will be the most unobtrusive, and if your signal is unfocused, Inverse Dither may be your best choice.
  • Convert - 24bit/96kHz AD/DA converters, Format conversion (AES/EBU, S/PDIF and Tos) ADAT interface
  • Sample Rate Conversion - 32, 44.1, 48, 88.2, 96kHz and make even asynchronous conversion possible
  • Shape - Five-band, 24bit Stereo Digital Equalizer
  • Enhance - Dynamic EQ, Stereo Adjust, Digital Radiance Generator™ and Spectral Stereo Image
  • Normalize - Real-time Gain Maximizer
  • Expand - Variable Slope Multiband Expander
  • Squeeze - Multiband Compressor
  • Trim - Variable Ceiling multiband Limiter
  • Fade - Manual or Auto Fade Tool
  • Dither - Maintain the highest resolution at the digital AES/EBU and S/PDIF outputs, Tos-link and ADAT
  • Balance - L/R balance in 0.1dB steps
  • Specifications
    Digital Inputs and Outputs
    Connectors: XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT)
    Formats: AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe
    Output Dither: HPF/TPDF dither 8-24 bit, mono, stereo, inverted
    Word Clock Input: RCA Phono, 75 ohm, 0.6 to 10 Vpp
    Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
    Processing Delay: 0.2 ms @ 48 kHz, 0.1 ms @ 96 kHz
    Frequency Response DIO: DC to 23.9 kHz ± 0.01 dB @ 48 kHz, DC to 47.9 kHz ± 0.01 dB @ 96 kHz
    Compressor THD+N: -130 dB (0.00003%) @ 10 dB Compression, 20 Hz-20 kHz
    Sample Rate Conversion Type: Asynchronous
    Dynamic Range: 130 dB
    THD+N: -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
    Input Rate Range: 31 kHz to 49 kHz

    Analog Inputs
    Connectors: XLR balanced (pin 2 hot)
    Impedance: 20 Kohm
    Max.Input Level: +22 dBu (balanced)
    Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu
    A to D Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
    A to D Delay: 0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz
    Dynamic Range: >103 dB (unweighted, BW=22 kHz), >106 dB(A)
    THD: -95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
    Frequency Response: 10 Hz to 20 kHz: +0/-0.2 dB @ 48 kHz, 10 Hz to 45 kHz: +0/-1 dB @ 96 kHz
    Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

    Analog Outputs
    Connectors: XLR balanced (pin 2 hot)
    Impedance: 100 ohm (active transformer)
    Max. Output Level: +22 dBu (balanced)
    Full Scale Output Range: -10 dBu to +22 dBu
    D to A Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
    D to A Delay: 0.57 ms @ 48 kHz, 0.28 ms @ 96 kHz>100
    Dynamic Range: 100 dB (unweighted, BW=22KHz), >104 dB(A)
    THD: -82 dB (0.008 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
    Frequency Response: 10 Hz to 20 kHz, +0/-0.5 dB @ 48 kHz, 10 Hz to 45 kHz, +0/-3 dB @ 96 kHz
    Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

    Complies with: EN 55103-1, EN 55103-2, Class B of FCC rules/part 15, Class B of CISPR 22

    Certified to: IEC 65, EN 60065, UL 1419 and CSA E65

    Operating Temperature: 32° F to 122° F (0° C to 50° C)
    Storage Temperature: -22° F to 167° F (-30° C to 70° C)
    Humidity: Max. 90 % non-condensing

    PCMCIA Interface
    Connector: PC Card, 68 pin type 1 cards
    Standards: PCMCIA 2.0, JEIDA 4.0
    Card Format: Supports up to 2 MB SRAM

    Control Interface
    MIDI: In/Out/Thru: 5 Pin DIN
    GPI, Pedal, Fader: ¼" phone jack

    Finish: Anodized aluminum front, Plated and painted steel chassis

    Dimensions: 56 x 128 dot graphic LCD-display, 19" x 1.75" x 8.2 (483 x 44 x 208)

    Weight: 5.2 lb. (2.35 kg)
    Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
    Power Consumption: <20 W
    Backup Battery Life: >10 years
    Free shipping in Canada. Conditions
    Additional information
    For more information about the Finalizer 96K, please visit the website of TC Electronic
    TC Electronic Logo
    Like us
    Follow us
    Now accepting
    ©2004-2017 - Systemes Guinois® Inc. All Right Reserved.