Weighing 7.3 oz, it's constructed from an impact resistant metal casing that's cool to the touch. A bright OLED display provides easy menu navigation.

CONNECTIVITY
The TRXCL3 sends audio with embedded timecode to camera via a UHF signal to QRX200, RX200 and QRX235 receivers or through ZaxNet's 2.4 GHz signal to an ERX3TCD receiver.

A TA5 audio input offers balanced stereo line level or sample rate converting AES. The 3.5mm output delivers audio and the BNC connector provides timecode in our out.

ENCRYPTED AUDIO
The TRXCL3 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.

INTERNAL RECORDING
Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

BETTER WORKFLOW
The TRXCL3 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together.

ADVANCED FEATURES
ZaxNet allows you to send or receive timecode, scratch track audio and remote control commands. Zaxcom High Density (ZHD) modulation increases the number of available channels in the wireless spectrum.

MHZ BANDS
".5 band" (512-614 MHz)
".6 band" (596-698 MHz)

Transmitter
RF Modulation: Proprietary Digital Method
TRXCL3.5 RF Frequency Range: 512 - 614 MHz
TRXCL3.6 RF Frequency Range: 596 - 698 MHz
RF Frequency Step: 100 KHz
RF Bandwidth in ZHD Mode: 50 KHz
RF Bandwidth: 200 KHz
Channel Separation in ZHD Mode: as close as 100 KHz (receiver dependent)
Channel Separation in XR Mode: 400 KHz
Antenna Connector: 50 SMA Female
Emission Designator: 180 KV2E
FCC Part: 74.861

Transmitter Audio
Dynamic Range: 114 dB
Distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
System Group Delay: 3.5 ms
Audio input connector TA5 male
Analog Input Range: -10 to +4 dBu
Analog input type balanced line level
Audio input Impedance: 4.7 k
ADC Bit-Depth: 24 Bits
ADC Sampling-Rate: 48 kHz
AES input Balanced with sample rate conversion
Sample rate range 32 Khz to 96 Khz

Timecode Reader / Generator
Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
Timecode Type: SMPTE
Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

Internal Recording
Media: MicroSD Card (Flash Memory)
File Format: .ZAX
Recording Time: 96 Hours (16 GB Card)

2.4 GHz ZaxNet Transceiver
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
RF power output TBD

Physical / Power
Weight: 7.3 oz
Dimensions (H x W x D): 1"x 3.55" x 3.23"
Display: Graphic OLED
Power Output: 25 / 50 / 100 mW - Software Selectable
Power consumption: 2.13 watts
*Power measured pre-output band pass filter