{"title":"Sound Anchors","description":"","products":[{"product_id":"conecoasters-floor-protector","title":"ConeCoasters Floor Protector","description":"\u003cp\u003eThese stainless steel disks will not only protect your floors they will also improve performance.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51466857087295,"sku":"12870","price":165.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/12870_full.jpg?v=1759903944"},{"product_id":"admid-1-pair-46","title":"ADMID 1 - Pair 46''","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51466998677823,"sku":"15536","price":2665.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/15536_full.jpg?v=1759918519"},{"product_id":"admid-1-pair-46-for-pmc-ib1s","title":"ADMID 1 - Pair 46'' (For PMC IB1S)","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467051204927,"sku":"16267","price":2655.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/16267_full.jpg?v=1759923580"},{"product_id":"admid-1-pair-46-for-pmc-mb2s","title":"ADMID 1 - Pair 46'' (For PMC MB2S)","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467051270463,"sku":"16268","price":2655.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/16268_full.jpg?v=1759923593"},{"product_id":"admid-2-pair-46-for-pmc-8-2","title":"ADMID 2 - Pair 46'' (For PMC 8-2)","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467429708095,"sku":"19565","price":2815.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/19565_full.jpg?v=1759947047"},{"product_id":"admid-1-pair-46-for-pmc-6-2","title":"ADMID 1 - Pair 46'' (For PMC 6-2)","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467430428991,"sku":"19566","price":2655.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/19566_full.jpg?v=1759947056"},{"product_id":"adj1-pair-44","title":"ADJ1 - Pair 44''","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound.\nThe Sound Anchors ADJ1 stands are designed to allow the engineer to correctly place a pair of monitors behind his console for best sound. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" bases and the uprights are filled and damped from the factory. ADJ1 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ1 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ1 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Sound Anchor ADJ1 stands have a welded construction which makes them strong, rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ1 Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the the world's leading studios. Sound Anchor ADJ1 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467905433919,"sku":"2020","price":1990.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/2020_full.jpg?v=1759881339"},{"product_id":"daw-w-one-redmount","title":"DAW w\/ One Redmount","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467911528767,"sku":"2030","price":2240.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/2030_full.jpg?v=1759881359"},{"product_id":"admid-2-pair-46","title":"ADMID 2 - Pair 46''","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"New","offer_id":51467911659839,"sku":"2032","price":2810.0,"currency_code":"CAD","in_stock":true},{"title":"Demo","offer_id":52279714611519,"sku":"2032-DEM","price":1995.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/2032_full.jpg?v=1759881368"},{"product_id":"barefoot-footprint-01-02-pair-38","title":"BAREFOOT Footprint 01\/02 - Pair 38''","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467960746303,"sku":"20933","price":1025.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20933_full.jpg?v=1759957356"},{"product_id":"barefoot-footprint-01-02-pair-44","title":"BAREFOOT Footprint 01\/02 - Pair 44","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467960811839,"sku":"20934","price":1025.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20934_full.jpg?v=1759957364"},{"product_id":"barefoot-mm12-vertical-pair","title":"BAREFOOT MM12 Vertical - Pair","description":"\u003cp\u003eThe Sound Anchors stands for the Barefoot MM12 Monitors are a variation of the ADMID Stand. These height adjustable stands are designed to allow the engineer to correctly place a pair of MM12 monitors for best sound. They isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eWhen the monitor is positioned vertically the stands are 22\" W x 22\" D and have 40\" uprights. When oriented horizontally, the stands are 32\" W x 22\" D and have 40\" uprights. Both designs enable solid support and proper positioning while keeping the stand completely out of the way of the sub woofers.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467960877375,"sku":"20935","price":2995.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20935_full.jpg?v=1759957370"},{"product_id":"adj27-pair-56","title":"ADJ27 - Pair 56''","description":"\u003cp\u003eBarefoot Studio Monitor Stand ADJ-27 are designed to allow the engineer to correctly place a pair of Barefoot MM26 or MM27 monitors behind the console in either the vertical or horizontal position. This will make your monitors work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\n\u003cp\u003eThe base of the Barefoot Studio Monitor Stand ADJ-27 is the same base and upright as the ADJ2-56. The base and the upright are filled and damped at the factory. The height and tilt adjustable speaker support brackets are made of 1\/8\" wall steel tube, 1\/2\" and 3\/8\" steel bars. All of this translates to a very solid, stable and non-resonant support for your speakers. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467960942911,"sku":"20936","price":2575.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20936_full.jpg?v=1759957378"},{"product_id":"moto27-pair","title":"MOTO27 - Pair","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467961008447,"sku":"20937","price":5150.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20937_full.jpg?v=1759957387"},{"product_id":"black-blue-dots-10","title":"Black \u0026 Blue Dots-10","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467962122559,"sku":"20950","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20950_full.jpg?v=1759957500"},{"product_id":"black-blue-dots-25","title":"Black \u0026 Blue Dots-25","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467962319167,"sku":"20951","price":90.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20951_full.jpg?v=1759957509"},{"product_id":"barefoot-mm12-horizontal-pair","title":"BAREFOOT MM12 Horizontal - Pair","description":"\u003cp\u003eThe Sound Anchors stands for the Barefoot MM12 Monitors are a variation of the ADMID Stand. These height adjustable stands are designed to allow the engineer to correctly place a pair of MM12 monitors for best sound. They isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eWhen the monitor is positioned vertically the stands are 22\" W x 22\" D and have 40\" uprights. When oriented horizontally, the stands are 32\" W x 22\" D and have 40\" uprights. Both designs enable solid support and proper positioning while keeping the stand completely out of the way of the sub woofers.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51467962450239,"sku":"20956","price":2798.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/20956_full.jpg?v=1759957526"},{"product_id":"barefoot-footprint-03-pair-38","title":"BAREFOOT Footprint 03 - Pair 38''","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468015567167,"sku":"21367","price":1025.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/21367_full.jpg?v=1759960610"},{"product_id":"barefoot-footprint-03-pair-44","title":"BAREFOOT Footprint 03 - Pair 44\"","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468015632703,"sku":"21368","price":1025.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/21368_full.jpg?v=1759960617"},{"product_id":"barefoot-footprint-01-02-pair-28","title":"BAREFOOT Footprint 01\/02 - Pair 28''","description":null,"brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468198707519,"sku":"23503","price":1025.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/23503_full.jpg?v=1759979875"},{"product_id":"adj3-pair-44","title":"ADJ3 - Pair 44\"","description":"\u003cp\u003eSound Anchor Studio Monitor Stand for 2 Speakers ADJ3 are designed to allow the engineer to correctly place two pairs of monitors behind the console. These stands allow independent height and tilt adjustment of both monitors. The ADJ3 stand is based on our proven ADJ1 stands and offers all of the same performance benefits. The symmetrical bases and the uprights are filled and damped from the factory. This makes the ADJ3 a very solid and stable support for your speakers. The speaker platforms are made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ3 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468231999807,"sku":"23896","price":2665.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/23896_full.jpg?v=1759983767"},{"product_id":"adj3-pair-56","title":"ADJ3 - Pair 56\"","description":"\u003cp\u003eSound Anchor Studio Monitor Stand for 2 Speakers ADJ3 are designed to allow the engineer to correctly place two pairs of monitors behind the console. These stands allow independent height and tilt adjustment of both monitors. The ADJ3 stand is based on our proven ADJ1 stands and offers all of the same performance benefits. The symmetrical bases and the uprights are filled and damped from the factory. This makes the ADJ3 a very solid and stable support for your speakers. The speaker platforms are made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ3 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468232065343,"sku":"23897","price":2825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/23897_full.jpg?v=1759983776"},{"product_id":"adj4-pair-44","title":"ADJ4 - Pair 44\"","description":"\u003cp\u003eThe Sound Anchor Studio Monitor Stand with Lateral Adjustment (ADJ4) are designed specifically for installations where there is between 2 3\/4\" and 5\" clearance between the wall and the back of the console. The upright of this stand can be adjusted from side to side which facilitates \"best\" lateral speaker positioning. The Sound Anchors ADJ4 stands are designed to allow the engineer to correctly place a pair of monitors behind his console. These stands allow height adjustment of the monitors. The base and the upright are filled and damped at the factory. ADJ4 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ4 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468232130879,"sku":"23898","price":2165.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/23898_full.jpg?v=1759983785"},{"product_id":"adj4-pair-56","title":"ADJ4 - Pair 56\"","description":"\u003cp\u003eThe Sound Anchor Studio Monitor Stand w\/ Lateral Adjustment (ADJ4) are designed specifically for installations where there is between 2 3\/4\" and 5\" clearance between the wall and the back of the console. The upright of this stand can be adjusted from side to side which facilitates \"best\" lateral speaker positioning. The Sound Anchors ADJ4 stands are designed to allow the engineer to correctly place a pair of monitors behind his console. These stands allow height adjustment of the monitors. The base and the upright are filled and damped at the factory. ADJ4 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ4 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468232196415,"sku":"23899","price":2325.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/23899_full.jpg?v=1759983794"},{"product_id":"admid-2-pair-46-for-atc-scm45a","title":"ADMID 2 - Pair 46\" (For ATC SCM45A)","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468273680703,"sku":"24369","price":2635.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/24369_full.jpg?v=1759988091"},{"product_id":"adj1-single-44","title":"ADJ1 - Single 44''","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound.\nThe Sound Anchors ADJ1 stands are designed to allow the engineer to correctly place a pair of monitors behind his console for best sound. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" bases and the uprights are filled and damped from the factory. ADJ1 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ1 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ1 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Sound Anchor ADJ1 stands have a welded construction which makes them strong, rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ1 Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the the world's leading studios. Sound Anchor ADJ1 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498174271,"sku":"9070","price":1295.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9070_full.jpg?v=1759891531"},{"product_id":"adj1-pair-56","title":"ADJ1 - Pair 56''","description":"\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound.\nThe Sound Anchors ADJ1 stands are designed to allow the engineer to correctly place a pair of monitors behind his console for best sound. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" bases and the uprights are filled and damped from the factory. ADJ1 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ1 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ1 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Sound Anchor ADJ1 stands have a welded construction which makes them strong, rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ1 Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the the world's leading studios. Sound Anchor ADJ1 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498239807,"sku":"9071","price":2155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9071_full.jpg?v=1759891541"},{"product_id":"barefoot-mm27-pair","title":"BAREFOOT MM27 - Pair","description":"\u003cp\u003eThese stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\n\u003cp\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar\" and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498305343,"sku":"9073","price":2635.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9073_full.jpg?v=1759891552"},{"product_id":"adj2-pair-56","title":"ADJ2 - Pair 56''","description":"\u003cp\u003eThe entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ1 is great for most speakers but for any application where the speaker is too large for the ADJ1 stand but is not quite large enough to require the Sound Anchor ADMID stand, the ADJ2 is the best stand. The ADJ2 is ideally suited to the new breed of midsized super monitors that have recently become popular in studios.\u003c\/p\u003e\n\u003cp\u003eThe ADJ2 stand features the same exact look as the ADJ1. The main difference between them is the dimensions of the base. The base of the ADJ2 stand is 17\" X 23\". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these three drawbacks.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors ADJ2 stands allow the engineer to correctly place a pair of monitors behind his console. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" base and the upright are filled and damped from the factory. ADJ2 stands offer a very solid, stable and non-resonant support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ2 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ2 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ2 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498370879,"sku":"9074","price":2329.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9074_full.jpg?v=1759891561"},{"product_id":"adj2-pair-44","title":"ADJ2 - Pair 44''","description":"\u003cp\u003eThe entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ1 is great for most speakers but for any application where the speaker is too large for the ADJ1 stand but is not quite large enough to require the Sound Anchor ADMID stand, the ADJ2 is the best stand. The ADJ2 is ideally suited to the new breed of midsized super monitors that have recently become popular in studios.\u003c\/p\u003e\n\u003cp\u003eThe ADJ2 stand features the same exact look as the ADJ1. The main difference between them is the dimensions of the base. The base of the ADJ2 stand is 17\" X 23\". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these three drawbacks.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors ADJ2 stands allow the engineer to correctly place a pair of monitors behind his console. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" base and the upright are filled and damped from the factory. ADJ2 stands offer a very solid, stable and non-resonant support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ2 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ2 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ2 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498436415,"sku":"9076","price":2155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9076_full.jpg?v=1759891571"},{"product_id":"adj2-single-44","title":"ADJ2 - Single 44''","description":"\u003cp\u003eThe entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ1 is great for most speakers but for any application where the speaker is too large for the ADJ1 stand but is not quite large enough to require the Sound Anchor ADMID stand, the ADJ2 is the best stand. The ADJ2 is ideally suited to the new breed of midsized super monitors that have recently become popular in studios.\u003c\/p\u003e\n\u003cp\u003eThe ADJ2 stand features the same exact look as the ADJ1. The main difference between them is the dimensions of the base. The base of the ADJ2 stand is 17\" X 23\". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these three drawbacks.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors ADJ2 stands allow the engineer to correctly place a pair of monitors behind his console. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" base and the upright are filled and damped from the factory. ADJ2 stands offer a very solid, stable and non-resonant support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ2 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ2 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ2 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"New","offer_id":51468498501951,"sku":"9077","price":1295.0,"currency_code":"CAD","in_stock":true},{"title":"Bundle","offer_id":52970653745471,"sku":"9077-BUNDLE","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9077_full.jpg?v=1759891584"},{"product_id":"daw-w-two-redmount","title":"DAW w\/ Two Redmount","description":"\u003cp\u003eWhen we went to work designing our DAW stand we decided that we should start with a clean sheet of paper and do something special. There are a few carts and tables that can be used to support a DAW but none of them were really designed specifically for this purpose and the ones that are available are not sturdy enough for the commercial studio environment. We set out to make something better.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor DAW2x is heavy and balanced. It is super sturdy and will give many years of service even under very hard day in day out use. The keyboard platform and video mount are height adjustable independent of each other. We added this feature to accommodate different chair positions and engineers of different sizes. The DAW 2x is an indispensable tool to the serious audio engineer.\u003c\/p\u003e\n\u003cp\u003eThe DAW1X is compact and portable so it can be stored out of the way when not in use. The Sound Anchor DAW2X can be easily converted to a DAW1x later on down the road if you decide that you only need 1 monitor. This conversion is simple and is available as a complete kit.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchor DAW 2X includes 2 redmount video mounting systems. The DAW2X system has 2 arms that allow you to mount 2 VESA compliant monitors up to 27\". The 2X system is designed in a way that makes it possible to line up your monitors exactly where you want them. Both monitors can be panned or tilted. The Sound Anchor redmount works with any monitor that has a 75mm, 100mm or 200mm X 100mm VESA mounting pattern.\u003c\/p\u003e\n\u003cp\u003eSound Anchor Digital Audio Workstation Stands are handcrafted in the USA. They are made of extra strong large section square steel tubing and heavy steel flat. The standard Sound Anchor finish is black with a light texture. The supplied floor interface is casters but leveling pads or carpet piercing spikes are also available.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498600255,"sku":"9078","price":2240.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9078_full.jpg?v=1759891595"},{"product_id":"motof-1x","title":"MOTOF-1X","description":"\u003cp\u003ePush the button and your monitors smoothly drop out of the field of view or return to their original height with the push of another button.\nThe MOTOF stands feature 25\" of vertical travel. The platform is centered over the powerful telescopic lifting column. The Sound Anchor MOTOF Stand has a powerful linear actuator inside it to smoothly raise and lower the speaker. The wired remote control unit precisely controls the up and down motion of two speaker stands. The stands are synchronized to move at exactly the same speed and when stopped they will stop at the same height. The control module is made to be fastened to any flat surface. The power supply\/logic module can be hung under the mixer.\u003c\/p\u003e\n\u003cp\u003eWhen monitors are positioned properly on stable, correct height platforms they work better period. The MOTOF Stand allows the engineer to control monitor precise height from his listening position.\nThe Sound Anchors MOTOF stands are designed to allow the engineer to correctly position a pair of monitors behind his console for best sound. The bases are filled and damped from the factory. MOTOF stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor MOTOF stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSpeaker Platform Sizes: 10\" X 12\" (default size) other sizes are available as a cost + option.\u003c\/p\u003e\n\u003cp\u003eSound Anchor MOTOF Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Sound Anchor MOTOF stands have a welded construction which makes them strong and stable. They are spiked at the floor to mass load and anchor your monitors in space. Special sorbathane pads are provided for use between the speaker and stand. Sound Anchors MOTOF Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor MOTOF Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498665791,"sku":"9079","price":2385.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9079_full.jpg?v=1759891603"},{"product_id":"motoa-1x","title":"MOTOA-1X","description":"\u003cp\u003ePush the button and your monitors smoothly drop out of the field of view or return to their original height with the push of another button.\nThe MOTOA stands feature 25\" of vertical travel and variable start or finish position. The telescopic lifting column of the Sound Anchor MOTOA Stand has a powerful linear actuator inside it to smoothly raise and lower the speaker. The wired remote control unit precisely controls the up and down motion of two speaker stands. The stands are synchronized to move at exactly the same speed and when stopped they will stop at the same height. The control module is made to be fastened to any flat surface. The power supply\/logic module can be hung under the mixer.\u003c\/p\u003e\n\u003cp\u003eWhen monitors are placed properly on stable platforms of the right height they work better period. The MOTOA Stand allows the engineer to control monitor height from his listening position.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors MOTOA stands are designed to allow the engineer to adjust the height of his monitors behind his console for best sound. The bases are filled and damped from the factory. MOTOA stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor MOTOA stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSpeaker Platform Sizes: 12\" X 15\" (default size) any smaller size is available as a no cost option.\u003c\/p\u003e\n\u003cp\u003eSound Anchor MOTOA Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and 1\/4\" aluminum plate. Sound Anchor MOTOA stands have a welded construction which makes them strong and stable. They are spiked at the floor to mass load and anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors MOTOA Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor MOTOA Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":51468498731327,"sku":"9080","price":2605.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/9080_full.jpg?v=1759891610"},{"product_id":"harbeth-mon40-4ps-14","title":"Harbeth: MON40-4PS-14","description":"\u003cdiv class=\"flex flex-col text-sm pb-25\"\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none [--shadow-height:45px] has-data-writing-block:pointer-events-none has-data-writing-block:-mt-(--shadow-height) has-data-writing-block:pt-(--shadow-height) [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\" data-turn-id=\"request-WEB:ede5cbbb-86ac-4116-b37a-005560ad0b93-7\" data-testid=\"conversation-turn-4\" data-scroll-anchor=\"true\" data-turn=\"assistant\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"64199a18-1623-4b8c-9515-940e67c144d5\" data-turn-start-message=\"true\" dir=\"auto\" data-message-model-slug=\"gpt-5-3\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\n\u003cp data-start=\"0\" data-end=\"424\"\u003eThe Harbeth Monitor 40 is a renowned loudspeaker that delivers a rich, natural sound with an expansive sense of space. Known for its smooth presentation and lifelike character, it brings out the depth and texture in music without sounding overly clinical. Its larger cabinet design allows it to fill a room with ease, making it a strong choice for listeners who appreciate a relaxed yet highly engaging listening experience.\u003c\/p\u003e\n\u003cp data-start=\"426\" data-end=\"841\"\u003eThe Sound Anchors 4 Post Signature stands are designed to complement the Monitor 40 with both stability and refined support. At 14 inches tall, they position the speakers at an ideal height for seated listening, while the solid four post construction helps minimize vibration and maintain clarity. The 15 inch by 14.5 inch top plate provides a precise fit for the speaker, creating a secure and balanced foundation.\u003c\/p\u003e\n\u003cp data-start=\"843\" data-end=\"1105\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eTogether, this pairing offers a thoughtful setup that supports both the performance and presence of the Monitor 40. The result is a dependable and well-matched combination that helps the speakers deliver their full potential in a dedicated listening environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":52521405120831,"sku":"60566","price":2070.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/har40_3ad06777-bc86-43d4-bc96-4aaed506c896.jpg?v=1774459729"},{"product_id":"harbeth-mon40-4p-14","title":"Harbeth: MON40-4P-14","description":"\u003cp data-start=\"0\" data-end=\"479\"\u003eThe Harbeth Monitor 40 is a classic large-format loudspeaker known for its natural, full-bodied sound and effortless presentation. Designed to bring music to life with warmth and clarity, it delivers a wide, immersive soundstage that fills the room without feeling forced. Its refined tonal balance makes it equally enjoyable for long listening sessions, allowing vocals and instruments to come through with a sense of realism and ease that feels engaging rather than analytical.\u003c\/p\u003e\n\u003cp data-start=\"481\" data-end=\"912\"\u003ePaired with Sound Anchors 4 Post stands, this setup is thoughtfully supported for optimal performance. The 14-inch height places the speakers at an ideal listening level, while the solid 4 post design provides stability and reduces unwanted resonance. The 15 inch by 14.5 inch top plate is sized specifically to complement the Monitor 40, ensuring a secure and well-matched foundation that helps the speakers perform at their best.\u003c\/p\u003e\n\u003cp data-start=\"914\" data-end=\"1247\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eTogether, the Monitor 40 and matching Sound Anchors stands create a cohesive listening experience that blends classic design with dependable support. This combination suits dedicated listening spaces where sound quality and proper setup matter, offering a balanced and enjoyable way to experience music across a wide range of genres.\u003c\/p\u003e","brand":"SOUND ANCHORS","offers":[{"title":"Default Title","offer_id":52521440641343,"sku":"60567","price":1780.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6931\/1551\/files\/har40.jpg?v=1774457385"}],"url":"https:\/\/www.economik.com\/collections\/sound-anchors.oembed?page=2","provider":"Studio Economik","version":"1.0","type":"link"}