Audio Technica AE3000 is a Cardioid Condenser Instrument Microphone. The Artist Elite AE3000 delivers supreme performance at extreme SPLs.
This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning.
Caractéristiques
Excels in high-SPL applications
Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
Low-profile side-address design with tapered grille allows optimal positioning of element vis-Ã -vis sound source
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad
Spécifications
ELEMENT
Fixed-charge back plate, permanently polarized condenser POLAR PATTERN
Cardioid FREQUENCY RESPONSE
20-20,000 Hz LOW FREQUENCY ROLL-OFF
80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY
-43 dB (7.0 mV) re 1V at 1 Pa IMPEDANCE
100 ohms MAXIMUM INPUT SOUND LEVEL
148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE
11 dB SPL DYNAMIC RANGE (typical)
137 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO
83 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS
11-52V DC, 3 mA typical SWITCHES
High-pass filter; 10 dB pad (nominal) WEIGHT
6.0 oz (170 g) DIMENSIONS
4.55" (115.5 mm) long,1.89" (48.0 mm) maximum diameter OUTPUT CONNECTOR
Integral 3-pin XLRM-type ACCESSORIES FURNISHED
AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE
R6
