UPC/EAN #4961310137779     MPN #AT4050ST    

$1899.00

Financement disponible

The Audio Technica AT4050ST is a stereo side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement.



This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone's dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.
  • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
  • Independent cardioid and figure-of-eight condenser elements
  • Switch selection of Mid-Side mode and two internally matrixed stereo modes
  • Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Certified by the METAlliance (Music Engineering and Technology Alliance)
  • ELEMENT : Externally-polarized (DC bias) condenser
    POLAR PATTERN : Cardioid and Figure-of-eight
    FREQUENCY RESPONSE : 20-18,000 Hz
    LOW FREQUENCY ROLL-OFF : 80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY :
    Stereo 90° : -42 dB (7.9 mV) dB re 1V at 1 Pa
    Stereo 127° : -41 dB (8.9 mV) dB re 1V at 1 Pa
    Mid : -36 dB (15.8 mV) dB re 1V at 1 Pa
    Side : -36 dB (15.8 mV) dB re 1V at 1 Pa
    IMPEDANCE : 50 ohms
    MAXIMUM INPUT SOUND LEVEL :
    Mid and Side : 149 dB SPL, 1 kHz at 1% T.H.D.;
    159 dB SPL, with 10 dB pad (nominal)
    NOISE :
    Stereo 90° : 25 dB SPL
    Stereo 127° : 16 dB SPL
    Mid : 15 dB SPL
    Side : 17 dB SPL
    DYNAMIC RANGE (typical) :
    Mid: 134 dB, 1 kHz at Max SPL
    Side: 132 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO :
    Stereo 90° : 69 dB, 1 kHz at 1 Pa
    Stereo 127° : 78 dB, 1 kHz at 1 Pa
    Mid: 79 dB, 1 kHz at 1 Pa
    Side: 77 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS :
    48V DC, 6.4 mA typical (both channels total)
    SWITCHES :
    90°, 127°, M-S;
    Flat, roll-off;
    10 dB pad (nominal)
    WEIGHT : 517 g (18.2 oz)
    DIMENSIONS : 193.0 mm (7.60") long, 53.4 mm (2.10") maximum body diameter
    OUTPUT CONNECTOR : Integral 5-pin XLRM-type
    CABLE : 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
    ACCESSORIES FURNISHED : AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
    AUDIO-TECHNICA CASE STYLE : R1
    POLAR PATTERN : STEREO 90°
    POLAR PATTERN : STEREO 127°
    POLAR PATTERN : MID, SIDE
    Voir plus de produits pour la marque Audio Technica
    Audio Technica Logo
    Maintenant offert
    Financement disponible
    Aimez-nous
    Suivez-nous
    ©2004-2024 - Studio Economik Inc.® Tous droits réservés.