With a compact, lightweight design, the Audio Technica AT822 is ideal for DAT recording as well as television, FM and field applications. X/Y Stereo Microphone.
The microphone is equipped with unbalanced outputs for use with readily available audio and video equipment. Its closely matched elements provide the spatial impact and realism of a live sound field. The mic offers excellent channel separation and switchable low-frequency roll-off.
Ideal for DAT recording as well as television, FM and field applicationsCompact, lightweight design is perfect for camera-mount useClosely-matched elements provide the spatial impact and realism of a live sound fieldExcellent channel separationSwitchable low-frequency roll-offIncludes a 1.7' (0.5 m) cable (XLRF-type to stereo 3.5 mm mini-plug); and a 10' (3 m) cable (XLRF-type to two mono 3.5 mm mini-plugs)Battery operation only
ELEMENT: Fixed-charge back plate permanently polarized condenserPOLAR PATTERN: X/Y StereoFREQUENCY RESPONSE: 20-15,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa, Battery: -38 dB (12.5 mV) re 1V at 1 PaCHANNEL BALANCE: <2.5 dBIMPEDANCE: Phantom: 250 ohms, Battery: 300 ohmsMAXIMUM INPUT SOUND LEVEL: Phantom: 128 dB SPL, 1 kHz at 1% T.H.D., Battery: 120 dB SPL, 1 kHz at 1% T.H.D.DYNAMIC RANGE (typical): Phantom: 109 dB, 1 kHz at Max SPL, Battery: 101 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 75 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical (each channel)BATTERY TYPE: 1.5V AA/UM3BATTERY CURRENT / LIFE: 0.7 mA / 700 hours typical (alkaline)SWITCH: Battery On/Off; Flat, roll-offWEIGHT: 247 g (8.7 oz)DIMENSIONS: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter, 21.0 mm (0.83") maximum body diameterOUTPUT CONNECTOR: Integral 5-pin XLRM-typeCABLES: Balanced: 2.0 m (6.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end; Unbalanced: 0.6 m (2.0') long stereo cable with 5-pin XLRF-type connector at microphone end and 3.5 mm TRS connector at output end.ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; battery; soft protective pouchAUDIO-TECHNICA CASE STYLE: S12