The Audio Technica BP4025 is a X/Y Stereo Field Recording Microphone. Innovative coincident capsule configuration produces accurate stereo image in smaller housing.
Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Large-diaphragm capsules offer pristine sound quality and exceptionally low noiseInnovative coincident capsule configuration produces accurate stereo image in smaller housingCompact, lightweight design is ideal for camera-mount useExcellent channel separationPhantom power operation-for use with professional equipmentSwitchable low-frequency roll-off and 10 dB padIncludes one balanced cable (two 3-pin XLRM-type connectors at output)RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
ELEMENT: Fixed-charge back plate permanently polarized condenserPOLAR PATTERN: X/Y StereoFREQUENCY RESPONSE: 20-17,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 PaCHANNEL BALANCE: <2.5 dBIMPEDANCE: 170 ohmsMAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. - 155 dB SPL, with 10 dB pad (nominal)DYNAMIC RANGE (typical): 131 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 11-52V DC, 7 mA typical (both channels total)SWITCH: Flat, roll-off; 10 dB pad (nominal)WEIGHT: 269 g (9.5 oz)DIMENSIONS: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameterOUTPUT CONNECTOR: Integral 5-pin XLRM-typeCABLE: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output endACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouchAUDIO-TECHNICA CASE STYLE: S12