MPN #PAIR 1073WPS    
BAE 1073 - Mic Pre/EQ 19'' Rackmount Pair with PSU

$8686.00

Financement disponible

Pair of BAE 1073 Preamp/EQ made from an authentic reproduction of a Neve 1073 module. Includes power supply.



The 1073 preamp yields a really fat sound. It seems to add subharmonics to the low end which makes the bottom end sound huge. It smoothes the top end which gives the highs a silky sheen. As well the 1073 compresses transients a little bit. It is a smooth, fat., larger than life sound. An added bonus is to use the DI inputs to fatten samples, synths and mixes since the DI can handle line levels.

The 1073 equalizer is very broadbanded and musical. It has a hi-pass filter with four frequencies- 50 Hz, 80 Hz, 160 Hz and 300 Hz. The low frequency band is shelving and has four frequencies - 35 Hz, 60 Hz, 110 Hz and 220 Hz. The low end of this equalizer is so tight that you can boost 220 Hz and not muddy up the sound. The mid band has six frequencies - 360 Hz, 720 Hz, 1.6 kHz, 3.2 kHz, 4.8 kHz and 7.2 kHz. The bandwidth is broad so you can boost or cut a lot without making things sound processed or unnatural. The hi band is shelving and is fixed at 12 kHz. It is smooth and silky and a little goes a long way.
  • Made from an authentic reproduction of a Neve 1073 module
  • Hi-Z direct inputs on the front panel
  • 48v phantom power on the front panel
  • Balanced mic input, line input and balanced +4 outputr from XLR connectors on the rear of the module
  • Output level control functions as fader when going straight to tape
  • Modules are mounted horizontally and take up only one rack unit each
  • Oversize power supply provides four times the current needed for optimum sound quality
  • Frequency Response
    10Hz to -3dB at 55kHz
    3 Band Equaliser
    HF: +/-16dB fixed frequency shelving at 12kHz
    LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
    MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
    High Pass Filter
    50Hz, 80Hz, 160Hz & 300Hz
    Mic Input Impedance
    1200/300 ohms
    Line Input Impedance
    10k ohms
    DI Input Impedance
    150k ohms
    Output Impedance
    35 ohms
    Common Mode Rejection Ratio
    100dB min @ 60Hz
    Maximum Output Level
    +27.4 dBu @ 600
    Power Requirements
    115/230 VAC, 28W
    Gain dB
    0 to 80 dB
    Equivalent Input Noise
    -110 dBu; Unweighted 300kHz Bandwidth
    Weight (Single/Dual)
    6 LBS / 2.72 KG
    10 LBS / 4.54 KG
    Dimensions in Inches (Module/Rackmount)
    45 mm W x 8.75 inches H x 10.5 inches D
    19W x 1.75L x 9D
    Voir plus de produits pour la marque BAE
    BAE Logo
    Maintenant offert
    Financement disponible
    Aimez-nous
    Suivez-nous
    ©2004-2024 - Studio Economik Inc.® Tous droits réservés.