The 4115 Broadcaster's Noise Cancelling Ribbon Microphone is used for close indoor talking situations where good quality broadcasting and high noise environment.
The 4115 has a proven reliable performance capability, being since its introduction, used by broadcasters throughout the world.
The high degree of acoustic damping applied to the robust corrugated aluminium ribbon ensures freedom from resonance and relative immunity to handling noises and mechanical shocks.
There are many situations in which speech is partially or completely drowned out by background noise; for example in aircraft, saw mills, shunting yards, or power stations. Yet these are all places where it may be a matter of life and death to have spoken instructions heard and obeyed without a second's delay.
The 4115 is the microphone of choice for these circumstances.
There are two special versions for use in aircraft where, in addition to the other requirements, it needs to be compatible with the aircraft's electronics. These models are approved by the Civil Aviation Authority, adn are also the choice of aircraft manufacturers and airlines.
Up to 20 dB reduction of middle and low frequency interfering soundsClose talking without breath or pop noisesBroadcast quality speech reproduction
Operating Principle: Pressure GradientTransducer: RibbonPolar Pattern: Figure 8Frequency Range: 80 Hz to 8 kHzImpedance: 300 ohmsSensitivity: -50 dB, re: 1 V/PaOutput Connectors: 3-Pin XLRLength: 8" (203.20 mm)Diameter: 2.00" (50.8 mm)Weight: 9.88 oz (280 g)
Numéro de pièce du fabricant : 4115