Furman PL-PRO-DMC
UPC/EAN #654061028000
MPN #PL-PRO-DMC
$925.00
Save 22.3%, MSRP $1190.00
The Furman PL-PRO-DMC is a Power Conditioner with Voltmeter / Ammeter.
The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman's revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.
Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
Recording
Can't track down where that noise is coming from Your mix sounding flat With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.
DJ Equipment
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.
Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Specifications
Maximum Output Current: 20 ampsLine Cord: Captive 3/12 AWG, 10 ft. black cord with NEMA 20 plugPull-out Lights: Two multi-LED, dimmable lampsBNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)Operating Voltage: 90 to 139 VACSpike Protection Mode: Line to neutral, zero ground leakageSpike Clamping Voltage: 188 VAC peak @ 3,000 AmpsResponse Time: 1 nanosecondMaximum Surge Current: 6,500 AmpsNoise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHzDimensions: 19" W x 10.5" D x 1.75" HWeight: 12 lbs.Power Consumption: 12 wattsSafety Listing: cTUVus
Write a review about the Furman PL-PRO-DMC
View more products from
Furman
