1215

Switchable boost/cut ranges of ±6 or ±15 dB

Electronically balanced/unbalanced inputs

Servo balanced/unbalanced inputs

RF filtered inputs and outputs

XLR, Barrier Strip, and 1/4" TRS connectors

-12dB/+12dB input gain range

18dB/octave 40Hz Bessel low-cut filter

Chassis/signal ground lift capability

Internal power supply transformer

Power-off hardwire relay bypass with 2-second power-up delay

Input Connectors : 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Input Type : Electronically balanced/unbalanced, RF filtered

Input Impedance : Balanced 40 kOhm, unbalanced 20 kOhm

Max Input : >+21dBu balanced or unbalanced

CMRR : >40dB, typically >55dB at 1kHz

Output Connectors : 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Output Type : Impedance-balanced/unbalanced, RF filtered

Output Impedance : Balanced 200 ohm, unbalanced 100 ohm

Max Output : >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth : 20Hz to 20kHz, +0.5/-1dB

Frequency Response : <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range

Dynamic Range : 109dB; 115dB

Signal to Noise Ratio : 90dB, 97dB

THD+Noise : <0.005%

Interchannel Crosstalk : <-80db, 20Hz to 20kHz

Bypass Switch : Bypasses the graphic equalizer section in the signal path

Low cut Switch : (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter

Range Switch : (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range

I/O Meter : 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Indicators : EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)

Operating Voltage : 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz

Power Consumption : 24W

Power Connector : IEC receptacle

Dimensions : 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)

Unit Weight : 8.5 lbs. (3.9 kg)

Shipping Weight : 9.5 lbs. (4.3 kg)