Tascam ML-4DOUT-E

4 Dante Inputs and 4 Balanced Line Outputs: Converts Dante audio to analog line-level signals using Euroblock connectors.

Built-In DSP Matrix Mixer: Mix and route signals using a 4-in/4-out matrix with EQ, filters, delay, limiter, ducking, and ambient noise compensation.

Flexible Output Routing: Send Dante input directly to line output or through DSP; also route to Dante network output.

PoE Powered: No external power adapter required when connected to a PoE-capable switch.

Compact, Half-Rack Design: Easily mounts under desks or in racks (optional rack shelf available).

Real-Time Monitoring and Control: Signal indicators for output status and LAN connection; remote configuration via TASCAM control apps.

Two Control Software Options: Full system control (DCP CONNECT) or simplified user operation (EZ CONNECT) for desktop and mobile devices.

Silent and Reliable: Fanless operation, solid build, and high-resolution audio support up to 96kHz/24-bit.

General Specifications

4 channel line output Dante converter with built-in DSP mixer

4 balanced line outputs on Euroblock connectors

4 Dante input and output channels

Supports PoE Power over Ethernet class 0

24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz

Half rack mountable size

Built-in 4 in 4 out matrix mixer with ducking and ambient noise compensation

10 band EQ high pass filter low pass filter delay and limiter

Configurable output reference levels from plus 15 dBu to plus 24 dBu

Signal indicators for output monitoring

LAN and Dante connection status indicators

Remote control via GPI and Dante

Two software control options: DCP CONNECT for full control and EZ CONNECT for simplified use

Compatible with Windows macOS iOS and Android

Supports Dante daisy chaining

Includes surface mount brackets for under desk or wall installation

Optional rack shelf AK-RS1 for mounting two units in a 19 inch rack

Audio Performance

Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz

Distortion THD plus N 0.002 percent max at minus 1 dBFS

Signal to noise ratio 108 dB

Crosstalk 100 dB

Dynamic range 108 dB

Analog Outputs

Connector type: Euroblock 3.81 mm pitch balanced

Output impedance: 200 ohms or lower

Nominal output: plus 4 dBu

Max output levels: plus 15 dBu at minus 9 dBFS, plus 18 dBu at minus 14 dBFS, plus 20 dBu at minus 16 dBFS, plus 22 dBu at minus 18 dBFS, plus 24 dBu at minus 20 dBFS

Dante Interface

Connectors: 2 x RJ45 for Dante and data

Protocol: Dante

Ethernet standard: 1000BASE-T IEEE 802.3ab

Cable requirement: Cat 5e or higher STP cables

Control Interface

GPI control via Euroblock connector 3.81 mm pitch

Control voltage input: 10V

Power and Environmental

Power supply: PoE class 0 or optional TASCAM PS-P1220E AC adapter

Power consumption: 4W

Operating temperature: 0 to 40 degrees Celsius

Dimensions: 214 x 44.45 x 136.1 mm

Weight: 863 grams

Included Items

ML-4D OUT E unit

Installation brackets x 2

Euroblock plugs x 4

Cable band kit x 1

Owner's manual with warranty