Apollo x16D Essentials Edition

30+ UAD Analog Classics Plug-Ins
Get a curated collection of classic compressors, EQs, channel strips, reverbs, delays, guitar amps, and more to start mixing with authentic analog sound right away.

Realtime UAD Processing
Run UAD plug-ins while you mix or record, so you can add polished studio sound without disrupting your workflow.

Dante Audio Networking
Connect to modern live sound and studio networks with Dante, making it easy to route audio across rooms, stages, and systems.

Apollo X Sound Quality
Hear your mixes through elite Apollo X conversion designed for clear, detailed monitoring.

Plug-In Scene Recall
Save and recall plug-in settings quickly, even during a live performance.

Immersive Monitoring Support
Use Apollo x16D as a flexible monitoring hub for surround and immersive mixing workflows.

Expandable Apollo System
Link multiple Apollo units together when your setup needs to grow.

Built for Studio and Stage
Use the same UAD-powered sound in recording studios, live venues, and networked production environments.

General Specifications
Device Type: Rackmount Thunderbolt audio interface with Dante
Version: Essentials+
Audio I/O: 18 x 20
Network Audio I/O: 16 x 16 Dante or AES67
DSP Processing: HEXA Core
Included Plug-Ins: 30+ UAD Analog Classics plug-ins

Audio Conversion
Resolution: 24-bit / 192 kHz
D/A Conversion: 2 channels
A/D Conversion: 1 channel talkback microphone
Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Monitor Output Dynamic Range: 133 dB A-weighted
THD+N: -129 dB at 1 kHz, -1 dBFS

Connectivity
Computer Connection: Thunderbolt 3
Thunderbolt Ports: 2
Network Audio Ports: 2 x 1 GbE RJ45
AES/EBU I/O: Stereo input, stereo output
Word Clock I/O: BNC input, BNC output
Monitor Outputs: 2 x balanced XLR
Talkback Microphone: Built-in

Network Audio
Network Format: Dante or AES67
Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
AES67 Sample Rate: 48 kHz
Dante Latency Settings: 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, 5.0 ms
Dante Audio Flows: 32 transmitter, 32 receiver
Dante Network Modes: Switched, redundant
AES67 Support: 48 kHz

Monitoring
Monitor Outputs: Stereo analog XLR
Monitor Output Reference Levels: +4 dBu, -10 dBV
Maximum Output Level at +4 dBu Reference: 24 dBu
Maximum Output Level at -10 dBV Reference: 10 dBV
Monitor Output Frequency Response: 20 Hz – 20 kHz, ±0.02 dB
Monitor Output Impedance: 100 ohms
Monitor Output Connector Type: Balanced male XLR, pin 2 hot
ALT Monitoring: Up to 2 stereo ALT monitor pairs in stereo mode
Immersive Monitoring: Up to 9.1.6
Monitor Correction: Apollo Monitor Correction support
Bass Management: Supported

DSP and Software
DSP Type: Six SHARC DSP processors
Realtime Processing: UAD plug-ins on all inputs
Plug-In Scene Recall: MIDI
Console Software: UAD Console
Console Recall Plug-In Formats: VST, AAX 64, Audio Units
DAW Compatibility: LUNA, Logic Pro, Pro Tools, Cubase, Ableton Live

Included Plug-In Categories
Channel Strips & Preamps: 6
Compressors / Limiters: 7
Equalizers: 3
Special Processing: 5
Instruments: 1
Delay & Modulation: 3
Reverbs & Rooms: 2
Mastering: 3
Guitar & Bass: 5

Power
Power Supply: External AC-to-DC
AC Input: IEC
AC Requirements: 100 V – 240 V AC, 50 – 60 Hz
DC Connector: 4-pin locking XLR
DC Requirements: 12 VDC, 9 A
Power Consumption: 72 W maximum, 30 W typical

Physical
Rack Size: 1U
Width: 19 in
Height: 1.74 in
Depth, Chassis Only: 12 in
Depth, Including Knob and Jack Protrusions: 13.5 in
Weight: 8 lb
Operating Temperature: 32°F – 104°F / 0°C – 40°C