Amplitude 16

Flexible Channel Configuration
Sixteen amplification channels support immersive theater layouts, with channel pairs bridgeable for speakers requiring additional power.

Independent Amplifier Architecture
Two separate eight-channel amplifier sections feature dedicated power supplies for dependable multichannel operation.

Class D Amplification
Custom ICEpower modules provide efficient amplification with low distortion and controlled heat dissipation.

Optional Network Audio
The optional Dante input board supports direct digital audio distribution over standard Ethernet and AES67-compatible networks.

Balanced Analog Connectivity
Dual DB25 connectors provide compact, rack-efficient access to all analog input channels.

Processor-Matched Performance
Input sensitivity aligns with compatible immersive audio processors to preserve dynamic range and minimize background noise.

Automation Integration
Trigger input and output connections support coordinated power control within integrated theater systems.

Amplifier Architecture
Amplifier Type: Class D
Channel Count: 16
Amplifier Sections: 2 independent 8-channel sections
Power Supplies: 2 dedicated power supplies
Operating Modes: Single-ended or bridged

Audio Power and Gain
Output Power at 8 Ohms: 200 W per channel at 1 kHz, 0.1% THD+N
Output Power at 4 Ohms: 400 W per channel at 1 kHz, 0.1% THD+N
Bridged Output Power at 8 Ohms: 800 W per channel at 1 kHz, 0.1% THD+N
Bridged Output Power at 4 Ohms: 1000 W per channel at 1 kHz, 0.1% THD+N
Total Output Power at 120 VAC: 2800 W, all channels driven, SE or BTL
Total Output Power at 230 VAC: 3200 W, all channels driven, SE or BTL
Peak Power: 6080 W, all channels driven, SE or BTL
Gain: 16 dB single-ended
Bridged Gain: 22 dB

Audio Performance
Frequency Response: 20 Hz to 20 kHz, +0/-0.6 dB, load-independent
Single-Ended THD+N: 0.0015% at 8 ohms, 5 W, 2 dBu
Bridged THD+N: 0.0015% at 8 ohms, 20 W, 8 dBu
Damping Factor at 100 Hz: 2340
Damping Factor at 1 kHz: 1820
Damping Factor at 10 kHz: 354
Signal-to-Noise Ratio: 126 dB, A-weighted, referenced to rated 1% THD output
Crosstalk: 96 dB, single-ended, 200 W at 8 ohms
Intermodulation Distortion: Less than 0.05%

Analog Inputs and Outputs
Input Connectors: 2 x female DB25
Input Pinout: Tascam analog
Input Impedance: 47 kOhms per phase
Input Sensitivity: 6.16 V, +18 dBu
Output Connectors: 1 x 5-way binding post per channel

Optional Audio over IP
Protocol: Dante, AES67 compatible
Network Input Channels: Up to 16
Network Connectors: 2 x RJ45, primary and secondary
Maximum Output Level: +18 dBu
THD+N: -110 dB, approximately 0.0003%, 1 kHz, 0 dBFS, 20 kHz bandwidth
Dynamic Range: 115 dB A-weighted, referenced to +18 dBu

Power Supply
Power Requirement: 2 x 100-240 V, auto-selecting
Standby Power Consumption: 0.52 W
Idle Power Consumption: 125 W
Maximum Power Consumption: 2 x 2000 W
Power Inputs: 2 x IEC C14
Startup Inrush Current: 16 A for less than 100 ms per inlet
Maximum Thermal Conversion: 683 BTU/h
Mains Fuses: 2 x 10 A slow-blow
Trigger Input: 5-15 VDC steady state, mini-jack TS
Trigger Output: 8-10 VDC steady state, mini-jack TS

Dimensions and Weight
Dimensions with Rack Ears: 482 x 132 x 452 mm
Dimensions with Rack Ears: 19 x 5.2 x 17.8 in
Shipping Box Dimensions: 54 x 53 x 22 cm
Weight: 20.5 kg
Weight: 45.3 lb
Shipping Weight: 22.4 kg
Shipping Volume: 0.064 m³